Adjustable Angle Shoes Flexing Tester
The finished shoes will be installed on the finished shoes flexing tester, and the flexed part of the finished shoes will be driven by the finished shoes flexing tester to carry out repeated flexing with the angle of flexing matching the shoe type and the fixed rate of the flexing machine, and then the destruction of the flexed part of the finished shoes will be observed after reaching the pre-set time or completing the specified number of flexing times, and the damage of the finished shoes will be evaluated in terms of the number of completed flexing times without destroying the finished shoes, or the severity of the destruction of the finished shoes after completing the specified number of flexing times, to assess the flexing-resistant performance of the tested finished shoes
Technical parameter
| Test station |
4 finished shoes can be tested at the |
| Bending angle |
(5 to 80). Adjustable |
| Bending rate |
(5 to 150) r/min adjustable (digital display) |
| Allowable specimen length |
150 to 400mm |
| Volume |
(86x45x64) cm |
| Motor |
Variable frequency motor |
| Weight |
about 188kg |
| Power |
AC220V, 400W |
Other supplier products
|
|
Fabric Tensile Strength Tester |
Fabric Tensile Strength Testerwith a variety of materials, the main speed of the tensile; tear, peel, fixed load, fixed elongation, elastic recover... |
|
|
SBI Single Burning Item |
Single burning instrument (SBI) was measured supplies (excluding floorings) performance at a single burning heat invasion conditions. Samples were ... |
|
|
byk-gardner scrub abrasion tester |
Wet Abrasion Scrub TesterIntroductionThe painted or uncoated surface need use a brush, sponge, scouring pad, sandpaper or other methods to test the... |
|
|
Drying Rate Tester - lab instrument |
TheTextile Drying Time Testeris a precision instrument designed to measure the evaporation rate and drying time of textiles under controlled enviro... |
|
|
Dry fallen wadding tester |
The G275 dry fallen wadding tester evaluates shedding performance of medical nonwovens and textiles under dry conditions by subjecting samples to t... |
All supplier products
Same products
