Civil Aviation Aircraft Interior Non-metallic Materials Flame Retardant Property Tester
Compliance Standards
FAR25.853 (FAA Airworthiness Standards for Transport Category Aircraft)
CCAR-25-R4.853 (Chinese Civil Aviation Regulations Appendix F Part I)
HB5469-2014 (Civil Aircraft Cabin Non-metallic Material Combustion Test Method)
HB5470-2014 (Civil Aircraft Cabin Non-metallic Material Combustion Performance Requirements)
RTCA/DO-160G Section G26.6.2/G26.6.3/G26.6.4 (Environmental Test Procedures)
Applicability Scope
This system applies to combustion performance testing of non-metallic materials in aircraft cabins:
1.1 Crew/Passenger Cabin Areas:
Including ceiling panels, interior walls, partitions, galley structures, cabinet linings, floor coverings, textiles (curtains/coverings), seat cushions, padding, coated fabrics (decorative/non-decorative), leather products, trays/kitchen equipment, electrical conduits, air ducts, joints/edge covers, B/E class cargo compartment linings, B/C/D/E class cargo floor panels, cargo covers, transparent enclosures, molded/thermoformed components, duct joints/edge trims, etc.
1.2 Non-crew/Passenger Cargo Areas:
Insulation blankets, cargo protective covers, tie-down equipment (including containers, ULDs) for each cargo compartment.
Key Performance Parameters
| Parameter Category | Specifications | ||
|---|---|---|---|
| Test Types | Equipment Composition | Combustion Chamber | |
Test Types
Vertical burning test
Horizontal burning test
45° inclination burning test
60° inclination burning test (dedicated chamber)
Send product request
Other supplier products
 |
Leather Freezing Flexing Tester - Test Equipment | Applicable Standards The tester adheres to international standards for material testing at low temperatures, including: ISO 4674-2(Rubber- or pla... |
 |
Medical Masks bacterial filtration efficiency tester | Application This machine is suitable for metrological verification departments, scientific research institutes, mask manufacturers and other relev... |
 |
Syringe needle flow tester | The Syringe Needle Flow Tester is designed to evaluate the flow characteristics of syringes by measuring the volume of liquid discharged over a spe... |
 |
Filter Media Testing System | Standards ISO 11155-1 / DIN 71460-1 Technical Data Measurement range (dimensions) U-SMPS 2050: 10 – 800 nm Volume flow rate 0... |
 |
Filter Media Tester | Filter media testers are widely used in quality control and production management in industries such as pharmaceuticals, medical devices, and labor... |
Same products
 |
Blanket Flammability Test Machine | Seller: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Seller: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Seller: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Seller: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Seller: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
