Fire retardant wood wood stack method burning test equipment
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
Email: serving@qinsun-lab。com
Product Introduction:
Fire retardant wood stack method combustion test device is a test device developed and produced by referring to the People's Republic of China public safety industry standard GA/T42.1 "Fire retardant wood combustion performance test method - Wood stack method". MDF-1 type flame retardant wood wood stack combustion test device is suitable for testing the combustion quality loss rate and flame burning time of all kinds of wood with thickness above 20mm in production and engineering after flame retardant impregnation treatment under specified combustion conditions.
Standards:
GB/T 17658-2018
GA/T 42.2-92
ASTM E
ISO 834-1:1999
EN 1363-1:2012
Working conditions:
1. Ambient temperature: room temperature —— 35oC
2. Ambient humidity: ≤70%
3. working voltage: AC 220±10V
4. gas source: natural gas, liquefied petroleum gas
5. timing accuracy: 3min±GA/T 42.1 Flame retardant wood burning performance test method wood stack method 0.1s
6. temperature error: 310oC≤±10oC
Specimen preparation:
1. The specimen size is 76mm×13mm×13mm, the cutting error is ±1mm, and the surface is required to be smooth and flat. Three sets of 24 pieces were prepared for each test piece.
2. The specimen is cut 0.6mm away from the longitudinal end of the wood, less than 1m long wood, and cut from the middle to both sides.
3. the specimen cut from the upper and lower sides of the width of the wood along the thickness direction parallel cut 13mm×13mm test piece two layers, and then cut 76mm along the length direction of the test piece, the remaining center part is not sampled.
4. before the test, the specimen must be at a temperature of 23±2oC, relative humidity (50±5) % of the condition, so that its quality is constant. The determination condition is the interval of 24h, the mass change of two weighing before and after each group is not more than 1%.
Send product request
Other supplier products
 |
Battery Nail Penetration Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Battery Nail Penetration Tester is designed for evaluating the safety performance ... |
 |
Photovoltaic module insulation resistance tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Photovoltaic Module Insulation Resistance Tester is a precision instrument des... |
 |
Contact Coolness Tester STD-QM | Get a quote： Web: qinsun-lab.com Email：serving@qinsun-lab。com Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Contact Coo... |
 |
ICI Mace Snagging Resistance Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com ICI nail hammer type yarn tester is suitable for testing knitted fabrics and wov... |
 |
Industrial Dry Cleaning Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-p... |
Same products
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
