Fire Resistance Valve, Hose & Pipe Test Machine

This machine complies with the following standards:

• Valve Fire Test (ISO 10497)

• Fire Test hoses (ISO 19921 & 19922)

• Plastic Pipe Fire Test (FTP II Res A 753)

In the case of internal pressure, valves using a burner simulation of fire, for marine and similar joints of pipe and fire resistance test under load conditions. Several nominal diameter hose arrangement and plastic containers of this device can measure each test, The device can measure the performance of each test watertight.

Standards

• ISO 19921 & 19922 fire resistance test standard metal piping components with elastomeric sealing• ISO 10497 testing process after the end of the test pressure valve performance testing standards and requirements and standards• IMO FTP Code II Res A 753 is suitable for testing of plastic pipe standard ships• JB/T 6899-1993Main Features:

• Combustion chamber Dimensions: 2.500 (W) × 1.500 (D) × 3.000 (H) mm; Stainless steel is used for chamber wall

• Internal tooling are all made of stainless steel;

• Burner cross-sectional area at least: 80mm × 350mm, a total of six units. The burner units could be adjustable according to the sample.

• Exhaust pipe size Ø400 x 1.000 (L) mm

• Temperature measuring range: 0 ~ 120 ºC ± 2 ºC

• Working pressure: 0.01 ~ 1MPa, the maximum test pressure 1.0MPa

• DPT can accurately test the hose pressure, test accuracy: ± 0.01 MPa

• Timing: 0 ~ 9999 ± 0.1 S

• The pump power: 1.5KW, can provide up to 10kgf / cm2 of water pressure

• Heating power: 15KW

• Flame temperature range: 800 ºC ± 50 ºC

• Use laboratory Labview system to design a simple graphical interface (GUI) and easy operating environment

• Through automated real-time recording and saving control logic test data to facilitate comparison test repeatability

• Provide data analysis and test report formats to meet customer requirements

•Testchamber is stainless steel, heatandcorrosion

• Burner position can be moved to meet different types of hose fittings and valves test

• MFC can automatically control the gas and air flow test range: 0-100L / min

•Electronicflow meter can test hoses and valves

Specification

Model	STD-ISO19922
Size	2.500(W)×1.500(D)×3.000(H)mm
Power supply	AC 220V, 50/60Hz, 15A
Weight	1.500kg
Instructions	Available
Exhaust	Minimum 15m2/min
Other requirements	Compressed air, computers, propane gas

Other supplier products

	Taber abrasion tester	Standards： ASTM D3884 、 ASTM D1175 、 ASTM D1044 、 ASTM D4060 、 TAPPI T476 、 ISO 9352 、 ISO 5470-1 、 JIS K7204 、 JIS A1453、 JIS K6902 、 JIS L1096 、...
	Fiber Thermal Shrinkage Tester	The Fiber Thermal Shrinkage Tester is a digital instrument designed for evaluating the dry thermal shrinkage of staple chemical fibers. By using im...
	Dynamic footwear water penetration tester	Application: Dynamic Footwear Water Resistance Tester is designed to determine the dynamic water resistance of all types of shoes. Principle： ...
	Universal Abrasion Resistance Tester	The instrument can be used to flat grinding, mill grinding, edge grinding, folding grinding and anti-frost, edge-close and fleeceand other wear-res...
	Face Mask Tensile Tester	Application The Face Mask Tensile Tester is suitable for mechanical property evaluation across the following industries and products: (1) Medical...

All supplier products

Same products

	Blanket Flammability Test Machine	Seller: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	Seller: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	Seller: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	Seller: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	Seller: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...