High-efficiency Filter Test Bench - Test Equipment

• 

The high-efficiency filter scanning test bench can test the efficiency and resistance of filters under the rated air volume conditions. The fundamental core of the test bench is particle counting. The dust source used in the test bench is liquid aerosol (DEHS) with a certain concentration, with a particle size of 0.1-0.3 μ m.

Meet the standards

It is designed and manufactured in accordance with the principles and requirements of the European standard EN1822-5 and in reference to relevant standards.

Parameter

1.Power supply voltage: Single-phase AC220V+5%; Three-phase AC380V+5% The power consumption is approximately 15kW

2. Power supply frequency :50Hz±2HZ

3. Applicable filter grade: High-efficiency filter

4. Aerosol particles :DEHS

5. Aerosol particle size :0.1-0.3 μ m

6. Test efficiency :(H13-U17) Note: ≥99.95%-≥99.999995%, MPPS

7. Test resistance: Range 0-1000Pa

Technical parameters of MPPS test bench

1.Flow rate :500-3500m ³ /h(refer to EN1822-5). Adjustment error: Adjustment accuracy ≤2%

2. Resistance measurement range :0-500Pa

3. Resistance: Measurement repeatability error 50-100Pa ±2Pa, {>}100Pa ≤3% (at rated flow)

4. Efficiency range :(H13-U17)(refer to EN1822-5

5. Counter sampling flow rate :28.3L/min±5%

6. Detection particle size range :0.1-0.3 μ m

7. Dimensions of the filter under test: Maximum :630(length)x630(width) Minimum :300(length)x300(width) According to the dimensions of the customer's product (dimensions between the maximum and minimum values can be tested by replacing the test fixture)

8. Data output: Printer

9. Overall power consumption :15KW

10. Floor area: Main structure, 13.000 x 3.000 x 3.000 (length x width x height)(estimated)

Function

1. Test filtration efficiency (MPPS）

2. Test the filtration resistance

3. Flow resistance curve

Other supplier products

	Textile Far - Infrared Radiation Heating Tester - lab instrument	With the continuous advancement of technology, new types of fibers and textile products have emerged, leading to increasingly high demands on texti...
	Multiplex Sand/Wheel Abrasion Tester	The STD-TE 65 Multiplex Sand/Wheel Abrasion Tester is designed to perform tests according to the conditions described in the following methods: AS...
	Automatic Cross-hatch Tester	The Automatic Cross-hatch Tester is a general-purpose instrument designed to perform cross-cut adhesion tests and scratch resistance tests on paint...
	byk-gardner scrub abrasion tester	Wet Abrasion Scrub TesterIntroductionThe painted or uncoated surface need use a brush, sponge, scouring pad, sandpaper or other methods to test the...
	Limiting Oxygen Index Tester	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain combustion of solid materials like textiles and plasti...

Same products

	Blanket Flammability Test Machine	Seller: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	Seller: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	Seller: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	Seller: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	Seller: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...