Automated Filter Tester G506| Testing Equipment

• 

The high-efficiency filter scanning test bench can test the efficiency and resistance of filters under the rated air volume conditions. The fundamental core of the test bench is particle counting. The dust source used in the test bench is liquid aerosol (DEHS) with a certain concentration, with a particle size of 0.1-0.3 μ m.

Meet the standards

It is designed and manufactured in accordance with the principles and requirements of the European standard EN1822-5 and in reference to relevant standards.

Parameter

1.Power supply voltage: Single-phase AC220V+5%; Three-phase AC380V+5% The power consumption is approximately 15kW

2. Power supply frequency :50Hz±2HZ

3. Applicable filter grade: High-efficiency filter

4. Aerosol particles :DEHS

5. Aerosol particle size :0.1-0.3 μ m

6. Test efficiency :(H13-U17) Note: ≥99.95%-≥99.999995%, MPPS

7. Test resistance: Range 0-1000Pa

Technical parameters of MPPS test bench

1.Flow rate :500-3500m ³ /h(refer to EN1822-5). Adjustment error: Adjustment accuracy ≤2%

2. Resistance measurement range :0-500Pa

3. Resistance: Measurement repeatability error 50-100Pa ±2Pa, {>}100Pa ≤3% (at rated flow)

4. Efficiency range :(H13-U17)(refer to EN1822-5

5. Counter sampling flow rate :28.3L/min±5%

6. Detection particle size range :0.1-0.3 μ m

7. Dimensions of the filter under test: Maximum :630(length)x630(width) Minimum :300(length)x300(width) According to the dimensions of the customer's product (dimensions between the maximum and minimum values can be tested by replacing the test fixture)

8. Data output: Printer

9. Overall power consumption :15KW

10. Floor area: Main structure, 13.000 x 3.000 x 3.000 (length x width x height)(estimated)

Other supplier products

	Comprehensive Engine Oil Filter Test Bench - lab instrument	Application This test bench is designed for comprehensive evaluation of engine oil filters, including spin-on filters and filter bypass valves. It...
	Single-Flame Source Tester	This instrument is designed according to ISO11925-2. it is used to test building material under conditions in the absence of external radiation to ...
	Compressed air filter test bench - Test Equipment	The newly developed DFP 3000 compressed air filter test bench provides fully automated measurement of the fractionation efficiency of compressed ai...
	Taber Abrasion Resistance Tester | Testing Equipment	Taber Abrasion Tester is also referred to as Taber abraser or Taber abrader, which is used to evaluate the wear resistance of materials or finished...
	True Body Weight Ingress Egress Tester	The tester applies repeated motion sequences to the seat to simulate realistic human ingress and egress. Key evaluation criteria include: Seat fra...

Same products

	Blanket Flammability Test Machine	Seller: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	Seller: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	Seller: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	Seller: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	Seller: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...