Bulk Density Measurement Tester
The Bulk Density Measurement Tester is a precision instrument designed to determine the bulk density of powders, granules, and particulate solids. Bulk density is a critical property affecting flowability, packing, and processing performance in industries such as pharmaceuticals, chemicals, food, and materials science. The tester provides an objective, quantitative method for evaluating the mass per unit volume of particulate materials under controlled conditions.
Application
(1) Determining bulk density of pharmaceutical powders, granules, and excipients.
(2) Evaluating flow and packing characteristics of food powders, sugar, salt, and grains.
(3) Quality control of chemical powders, catalysts, and pigments.
(4) Process optimization for material handling, storage, and transport.
(5) Research and development of new powder formulations with improved flow properties.
(6) Determination of loose/poured density and comparison with tapped density for compaction studies.
Standards
(1) ASTM B212 — Standard Test Method for Apparent Density of Powders
(2) ASTM D1895 — Standard Test Methods for Bulk Density and Tapped Density of Powders
(3) ISO 60 — Determination of apparent density of powders
(4) ISO 697 — Methods for determining density of granular materials
(5) ISO 787-11 — Test methods for chemical analysis of ceramics; apparent density measurement
(6) USP <616> — Bulk density determination for pharmaceutical powders
Parameters
| Parameter | Specification |
|---|---|
| Measuring Range | 1 g – 1 kg (sample dependent) |
| Measuring Accuracy | ±0.001 g/cc |
| Measurement Time | 5–10 seconds per sample |
| Sample Volume | 100 cm³, 400 cm³ (standard containers) |
| Measuring Medium | Powder or liquid (water standard) |
| Data Output | RS-232 interface |
| Operation Mode | Fully automatic electronic operation |
| Alarm Function | Upper and lower density limit indicators |
| Environmental Compensation | Temperature and solution adjustments |
| Funnel/Chute | Standard dimensions with controlled orifice and cone angle |
| Leveling Device | Straight edge or spatula for precise excess material removal |
Send product request
Other supplier products
 |
Leather Seam Fatigue Tester | Standards ISO 5402: Leather physical testing – Flex tester method for adhesion and strength analysis. SATRA TM55: Seam fatigue testing fo... |
 |
Ozone Test Chamber | Ozone testing laboratories have wide applications in various fields, including but not limited to: Material aging testing: Used to evaluate the ag... |
 |
Rating Observation Board | TheRating Observation Boardis an intelligent monitoring system designed for real-time evaluation and visualization of product quality metrics in in... |
 |
Color Fastness Automatic Grading System | The Color Fastness Automatic Grading System is a precision instrument designed to evaluate textile colorfastness, including color change, staining,... |
 |
Washer and Dryer - lab instrument | Scope of Application Used for the drying process in theTextile Testing - Home Laundering and Drying Proceduresstandard and other textile testing e... |
Same products
 |
Blanket Flammability Test Machine | Seller: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Seller: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Seller: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Seller: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Seller: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
