Bulk Density Measurement Tester
The Bulk Density Measurement Tester is a precision instrument designed to determine the bulk density of powders, granules, and particulate solids. Bulk density is a critical property affecting flowability, packing, and processing performance in industries such as pharmaceuticals, chemicals, food, and materials science. The tester provides an objective, quantitative method for evaluating the mass per unit volume of particulate materials under controlled conditions.
Application
(1) Determining bulk density of pharmaceutical powders, granules, and excipients.
(2) Evaluating flow and packing characteristics of food powders, sugar, salt, and grains.
(3) Quality control of chemical powders, catalysts, and pigments.
(4) Process optimization for material handling, storage, and transport.
(5) Research and development of new powder formulations with improved flow properties.
(6) Determination of loose/poured density and comparison with tapped density for compaction studies.
Standards
(1) ASTM B212 — Standard Test Method for Apparent Density of Powders
(2) ASTM D1895 — Standard Test Methods for Bulk Density and Tapped Density of Powders
(3) ISO 60 — Determination of apparent density of powders
(4) ISO 697 — Methods for determining density of granular materials
(5) ISO 787-11 — Test methods for chemical analysis of ceramics; apparent density measurement
(6) USP <616> — Bulk density determination for pharmaceutical powders
Parameters
| Parameter | Specification |
|---|---|
| Measuring Range | 1 g – 1 kg (sample dependent) |
| Measuring Accuracy | ±0.001 g/cc |
| Measurement Time | 5–10 seconds per sample |
| Sample Volume | 100 cm³, 400 cm³ (standard containers) |
| Measuring Medium | Powder or liquid (water standard) |
| Data Output | RS-232 interface |
| Operation Mode | Fully automatic electronic operation |
| Alarm Function | Upper and lower density limit indicators |
| Environmental Compensation | Temperature and solution adjustments |
| Funnel/Chute | Standard dimensions with controlled orifice and cone angle |
| Leveling Device | Straight edge or spatula for precise excess material removal |
在线联系供应商
Other supplier products
 |
Textile Flatness Tester | The Textile Flatness Tester is a precision instrument designed to evaluate fabric surface evenness by quantifying thickness variations, weave irreg... |
 |
air-cooled xenon lamp aging tester | What is A Light Fastness Tester？ A Light Fastness Tester, or Xenon Tester, Accelerated Ageing Chamber, is used for xenon arc testing in dye fastne... |
 |
Rubbing Color Fastness Tester | Application This instrument is applicable to the test of color fastness in textile, knitwear, leather, electrochemical plate and printing Accesso... |
 |
Gravel Impact Tester | Testing Equipment | The Gravel Resistant Impact Tester/Stone Chip Tester is specifically designed for gravel impact testing of automotive materials and surface coating... |
 |
The color fastness automatic grading system | Application Scope The color fastness automatic grading system is used to evaluate the color fastness of textiles, including color staining fastnes... |
Same products
 |
Blanket Flammability Test Machine | 卖方: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | 卖方: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | 卖方: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | 卖方: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | 卖方: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
