Fogging Tester，automotive interior fogging tester，6 station mist tester

Fogging Tester is mainly used to test the evaporation of volatile components in materials such as interior plastic parts of automobiles and aircraft, polyurethane, textiles, leather, adhesives, non-woven fabrics, and thermoplastic elastomers at high temperatures.

Application

1. Evaluating Material Fogging Performance

The fogging tester is primarily used to evaluate the evaporation of volatile components from interior materials of automobiles, aircraft, and other vehicles at high temperatures. These interior materials include plastic parts, polyurethane, textiles, leather, adhesives, non-woven fabrics, and thermoplastic elastomers. The test reveals the generation of volatile substances from the materials at high temperatures, thus determining their fogging performance.

2. VOC Detection

This instrument is one of the essential instruments for VOC (Volatile Organic Compounds) detection in the automotive interior industry. The test provides evaporation data of volatile substances from interior materials at high temperatures, providing important information for controlling indoor air pollution and ensuring the health of drivers and passengers.

3. Screening Environmentally Friendly Materials

Through testing with the fogging tester, environmentally friendly interior materials that meet environmental standards can be selected, helping automobile manufacturers improve the market competitiveness of their products while reducing environmental pollution.

Standard Test

DIN 75201: Automotive trim material fogging resistance.

ISO 6452: Coated fabrics fogging behavior in vehicle interiors.

SAE J1756: Automotive interior material fogging test protocol.

BS EN 14288 & QB/T 2728: Leather and textile fogging evaluation.

PV 3920/3015: VDA-standard fog value determination for non-metallic materials.

ES-X83231. NES M0161. GM 9305P: OEM-specific fogging requirements for automotive suppliers.

Feature

Dual-Bath System:

High-Temperature Bath: 670×490×540mm, 3kW heating power (up to 150°C).

Low-Temperature Bath: 400×220×520mm, 500W cooling capacity (0–100°C).

Automated Controls:

Digital thermoregulator with microprocessor for precise temperature programming.

Programmable timer (1–9999 min) with auto-stop and end-test buzzer.

Modular Accessories:

18/8 stainless steel test cups, flat beakers, and chrome steel rings for sample mounting.

Six interchangeable cooling plates and haze/gloss measurement kits.

Safety Compliance:

CE-certified with anti-acid epoxy coating, emergency stop, and overpressure relief.

Parameters

Parameter	Specification
High-Temperature Range	Room temperature – 150°C (280°C optional)
Low-Temperature Range	0–100°C
Temperature Stability	±0.1°C (at 200°C)
Heat-Up Time	<45 min (to 150°C)
Cooling Capacity	500W (low bath)
Power Supply	AC 220V, 50Hz, 3.5kW
Dimensions	500 (W) × 650 (D) × 600 (H) mm
Net Weight	50 kg (excluding thermal media)
Data Interface	USB 2.0. remote sensor compatibility
Safety Systems	Magnetic switch, thermostat, audible alerts

Accessoriess

Standard accessories：Main unit *1. constant temperature controller (cooling device) *1. glass beakers (fogging cups) *6.circular glass plates *6. square glass plates *6 (for reflection method testing), haze meter *1. metal rings *6.Fluororubber sealing rings *6. aluminum foil *1 pack, φ80mm sampler *1. dioctyl phthalate (DOP), silicone oil (heat transfer oil) / 32Kg, diisodecyl phthalate (DIDP)

Test Procedures

1.First of all , get the accessories and test samp.

2.Prepare an aluminum foil,place it in the scale to weigh it, and record the value.

3.Place aluminum foil and glass plate over the fog cup.

4.Set the cycle parameters of the low temperature control box, set host temperature and time parameters.

5.Start the instrument,the sample is heated inithe fog cup.

is started.When the timing is reached, remove.

the aluminum paper fZrom the station.

6.Put it into the scale again and weigh it, and record the value.

Other supplier products

	Wet Microbial Penetration Tester	The wet microbial penetration tester is mainly used to evaluate the barrier ability of medical protective equipment (such as surgical gowns, isolat...
	Rubber Sleeve Rebound Tester	The Rubber Sleeve Rebound Tester is designed to evaluate the resilience and compression performance of collection needle rubber sleeves. It measure...
	Sustained Burning Tester for Liquids	Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 32.5.2 Test L...
	Bag lifting fatigue testing machine	This machine is suitable for up and down vibration fatigue test of plastic handbag, garbage vest bag, kraft paper bag, woven bag and other bags bea...
	Ink printing proof press meter	How it works: Ink printing proof machine is mainly based on the principle of printing reproduction, through the simulation of the press pressure, ...

All supplier products

Same products

	Tabletop Xenon Arc Weathering Tester (SunMaster)	Seller: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat...
	Blow-By Test Rig	Seller: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa...
	Air filter System（ISO 16890/EN 779）	Seller: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a...
	Oil Thread Leak Test System	Seller: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ...
	Manual HEPA/ULPA Filter Scanning Test System	Seller: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan...