Flame Spread Tester for Thermal and Acoustic Insulation Materials
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The Flame Spread Tester for Thermal and Acoustic Insulation Materials is designed to evaluate the flame propagation characteristics of insulation and acoustic materials. You can expose samples to a standard thermal radiation source and ignite them with a controlled flame to determine their critical heat flux. This instrument is FAA-approved and compliant with international standards, providing accurate and repeatable measurements for aerospace, civil aviation, and material development applications.
Standards
This tester conforms to the following national and international standards:
GB/T 27904‑2011 — Test method for flame spread of interior decoration materials
GB/T 25207‑2010 — Classification of combustion performance of building decorative materials
GB 8624‑2012 — Classification of burning behavior of building materials and products
GB/T 16172‑2007 — Determination of heat release rate and total heat release of building materials and products (Cone Calorimeter Method)
BSS 7365 — UK aerospace standard for combustion and smoke density of aerospace composite and interior materials
AITM 2.0053 — European aerospace industry method for heat release rate and smoke evaluation
FAR Part 25 Appendix F Part VI — FAA regulatory requirement for flame propagation, smoke density, and toxicity in civil aircraft cabin materials
Parameters
| Parameter | Specification |
|---|---|
| Dimensions | 1220 × 570 × 520 mm; 1200 × 1150 × 1350 mm; 800 × 800 × 400 mm |
| Weight | 185 kg |
| Thermal Radiation Source | 400 VAC, 3-phase electric heating plate, PID control, ±0.1°C accuracy |
| Radiation Strip Width | 76 mm, six strips, operational up to 704°C |
| Sample Angle | 30° relative to horizontal plane |
| Ignition System | Axially symmetric propane burner, 0.15 mm nozzle |
| Burner Height | Flame at least 51 mm above sample plane |
| Flame Spread Measurement | Laser pointer for accurate monitoring |
| Thermocouple Placement | Back wall 279 mm, right wall 292 mm, below radiation plate 51 mm, ±2°C accuracy |
| Heat Flux Range | ≥60 kW/m², with self-circulating cooling water |
| Heat Flux Mounting | Steel plate 3.2 mm thick, with 3 × 25.4 mm insertion holes |
| Sample Holders | Standard and short versions (for hook-and-loop tests) |
| Data Acquisition | Computer and printer, automatic test timing ±0.1 s |
Send product request
Other supplier products
 |
General Ventilation Filter Test Stand| Testing Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Application The Filter Test Platform is designed for testing air filters in compl... |
 |
45 degrees wire and cable burning instrument | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Main technical parameters： Type: touch screen automatic Sample length: 600 &plus... |
 |
Dynamic Loading Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The dynamic loading machine gives information on the thickness loss of textile flo... |
 |
The textile moisture absorption and heat generation performance tester - Test Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Application ScopeThe textile moisture absorption and heat generation performance t... |
 |
Cross Hatch Cutting and Adhesion Tester | ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Cross Hatch Cutting and Adhesion Testing provides a relative movement of the s... |
