Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester
The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-term structural stability, height retention, and hardness consistency of mattresses under repeated rolling load conditions. The system uses a 240 lb hexagonal roller to simulate human body movement and load distribution during extended mattress use, representing approximately ten years of service life. The tester is suitable for mattresses ranging from single size to king-size configurations and supports automated durability testing in accordance with recognized international standards.
Application
The Mattress Rollator is used for durability and performance evaluation of the following products:
Innerspring mattresses
Foam mattresses (polyurethane foam, memory foam)
Latex mattresses
Hybrid mattresses (spring + foam or latex structures)
Children’s and adult mattresses
Mattress prototypes during design validation
Production quality control and type testing in mattress manufacturing
Standards
The Mattress Rollator complies with or references the following standards:
ASTM F1566 Section 6 – Mattress Hardness Rating
ASTM F1566 Section 7 – Mattress Durability Testing
GB/T 26706 – General Technical Requirements for Mattresses (related clauses reference)
Parameters
| Parameter | Unit | Specification |
|---|---|---|
| Test Station | — | Single station |
| Roller Type | — | Hexagonal roller |
| Roller Mass | lb (kg) | 240 lb (approx. 109 kg) |
| Test Cycles | — | 100.000 cycles (200.000 reciprocating strokes) |
| Simulated Service Life | — | Approx. 10 years |
| Test Speed | cycles/min | Adjustable, up to 20 |
| Stroke Length | — | Programmable |
| Applicable Mattress Size | — | Single to king size |
| Control System | — | PLC with touchscreen interface |
| Power Failure Protection | — | Roller auto-lift with cycle memory |
| Equipment Dimensions | in | 101 × 113 × 82 |
| Equipment Weight | lb | Approx. 3.000 |
| Shipping Weight | lb | Approx. 3.300 |
| Power Supply | — | 480 V, three-phase (240 V optional) |
Features
240 lb hexagonal hardwood roller mounted on precision ball bearings
Roller assembly laterally balanced for uniform load distribution
Vertical and lateral free-floating roller design, independent of cylinder hysteresis
Adjustable roller lateral position to accommodate different mattress widths
Programmable stroke with consistent starting position
Variable-speed motor control for flexible test cycle adjustment
PLC-controlled cycle counting with automatic stop at test completion
Automatic roller retraction and data retention during power outages
Lower limit protection to stop operation in case of excessive specimen wear
Tool-free mattress platform adjustment using lever-operated mechanisms
Sealed polyurethane wheels and stainless steel tracks for low maintenance
Independent floor-mounted control panel with emergency stop function
Accessories
Hexagonal roller assembly (240 lb)
Adjustable mattress support and positioning platform
PLC control system with touchscreen interface
Battery-powered roller lifting system
Emergency stop and safety interlock interfaces
Optional safety enclosure or light curtain
Test Procedures
Measure and record mattress height and hardness prior to testing
Adjust support platform according to mattress size
Place and position the mattress on the test platform
Set test cycles, speed, and stroke parameters via touchscreen
Start the durability test and allow the roller to operate automatically
Monitor test progress via cycle counter and status indicators
Upon completion, the roller automatically lifts from the mattress
Remove the mattress and proceed with post-test evaluation
Send product request
Other supplier products
 |
Flame Durability Testing Machine,Continuous Burning Time Tester for Liquids,ISO 9038 | Introduction When the hazardous liquid is heated to 0.5 ºC and 75 ºC, flame durability tester is used to evaluate the continuous burning... |
 |
Textile Fiber Composition Analyzer | Standard ASTM D276(Standard Test Method for Identification of Fibers in Textiles) ISO 1833(Determination of Fiber Content in Textiles) AATCC 2... |
 |
Glove Cut Resistance Tester | Product Introduction: The machine is used to test the cutting resistance of gloves. Under the specified load, the blade cuts the sample to measure... |
 |
Cleanliness Analysis System | Production： The cleanliness analysis system fully complies with the requirements of standards such as VDA19.1 - 2015. ISO16232. ISO4406. ISO4407. ... |
 |
Goggle Puncture Resistance Evaluation Apparatus | Applicable standards: GB 811-2010 ECE R22.05 EN1077 Purpose It is to make a certain weight of sharp objects fall from the height specified in ... |
Same products
 |
Air Intake Filter Test System | Seller: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Seller: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
|
|
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Seller: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Seller: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
