Stick-Slip – Tribological Test Stand (G-H3P)，Stick-slip friction testing machine
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Stick-Slip Tribological Test Stand is designed to predict stick-slip noise (“squeak” or “creak”) in automotive interior and functional components. It measures critical parameters including static friction, dynamic friction, maximum frictional acceleration, vibration frequency, and friction coefficient. The system can simulate environmental conditions such as water, grease, dust, and temperature changes, providing reliable data for material selection, design optimization, and quality control in automotive interiors and functional parts.
Application
(1) Automotive interior materials: evaluation of friction performance on seat leather, door panel soft materials, instrument panels, and center console materials.
(2) Automotive functional components: friction noise prediction for armrests, steering wheels, door handles, cup holders, etc.
(3) Material compatibility studies: analysis of stick-slip behavior in different material combinations, predicting potential squeak noise.
(4) Friction performance research: measurement of static friction, dynamic friction, frictional acceleration, friction coefficient, and pulse frequency.
(5) Environmental factor evaluation: assessment of water, oil, dust, and temperature impact on stick-slip and friction properties.
(6) Surface optimization: supports surface treatment, coating improvement, and material formulation optimization.
(7) Quality control and R&D: provides critical parameter references for product development and manufacturing.
Standards
(1) VDA 230-206 – German automotive friction noise standard.
(2) BMW PR315. BMW TL 9169300.
(3) VW / Audi / Porsche TL 52064. PV3981.
(4) Ford L400.
(5) TPJLR-00-230 – Jaguar Land Rover friction noise and friction performance standard.
Note: Standards cover automotive friction noise testing, friction force measurement, and environmental simulation requirements.
Parameters
| Parameter | Range / Specification | Description |
|---|---|---|
| Relative Speed (Linear Motor) | 1–150 mm/s | Simulates real friction speed |
| Stroke | 10–100 mm | Adjustable for different materials |
| Load Range | 2–80 N | Simulates different contact pressures |
| Temperature Range | -30℃ to 80℃ | Simulates environmental conditions |
| Static/Dynamic Friction Force | 0–35 N | Accurate measurement of friction forces |
| Maximum Acceleration | 0–25 g | Records stick-slip transition |
| Measurement Angle | 0–80° | Adapts to different material contact angles |
| Friction Frequency | 0–150 Hz | Simulates vibration frequency and friction state |
| Feed Mode | Force Control / Displacement Control | Programmable testing modes |
| Machine Dimensions | 250 × 250 mm | Compact lab tabletop design |
| Control System | PLC / PC | Real-time data acquisition and report generation |
Features
(1) High-precision measurement: combination of linear motor and force/acceleration sensors ensures accurate friction, acceleration, and pulse frequency measurement.
(2) Environmental simulation: testing under varying temperature, water, oil, and dust conditions.
(3) Quantifiable stick-slip noise: risk assessment (RPN) predicts potential squeak noise.
(4) Flexible testing: supports force control and displacement control modes to simulate diverse real-world scenarios.
(5) Data visualization: real-time curves and automatic report generation for R&D analysis.
(6) Compact and reliable: linear motor-driven structure, small footprint, low maintenance.
(7) Safety: optional protective enclosure prevents operator injury during testing.
Accessories
| Accessory | Specification | Function |
|---|---|---|
| Test Material Fixture | Adjustable | Secures sample, ensures stable friction testing |
| Friction Test Head | Metal or Rubber | Simulates fingertip, shoe sole, or component surface |
| Force Sensor | 0–80 N | Measures static and dynamic friction forces |
| Acceleration Sensor | 0–25 g | Records stick-slip acceleration variations |
| Temperature Control Plate | -30℃ to 80℃ | Simulates different environmental temperatures |
| Data Acquisition System | PC / PLC | Real-time collection of friction, acceleration, and pulse data |
| Software | RPN Calculation and Visualization | Risk assessment, pulse frequency analysis, reporting |
Test Procedures
(1) Prepare sample material and fix it on the test fixture, ensuring flat surface.
(2) Install and calibrate friction test head, force sensor, and acceleration sensor.
(3) Set test parameters: load, stroke, speed, temperature, and cycles.
(4) Start the test program, monitor real-time friction, acceleration, and pulse frequency.
(5) After testing, save data, generate curves, and perform RPN risk assessment report.
(6) Ensure safety: avoid operator contact with moving parts, use protective enclosure if necessary.
Maintenance Information
(1) Clean force, acceleration, and test head surfaces regularly.
(2) Calibrate sensors periodically to maintain accuracy.
(3) Inspect linear motor and fixture for mechanical wear.
(4) Verify environmental simulation equipment (temperature, water, dust) functions properly.
(5) Update software and check data acquisition system connectivity.
Send product request
Other supplier products
 |
Automatic friction drill resistance evaluation system | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Anti-Drill Tester (Friction Method) is designed to evaluate the drill and... |
 |
ISO Conveyor Belt Friction Testing Machine Manufacturer China | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Conveyor Belt Drum Friction Testing Machine is a specialized instrument d... |
 |
Battery Powder Compaction Density Measurement System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard Engineered to comply with global testing standards (ISO 3953.ASTM B527), our Po... |
 |
STD IPX7 Machine Waterproof Test Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction Test the product waterproof performance in the soaking environment (w... |
 |
Catheter Vacuum Leak Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The catheter vacuum leak tester is a professional device used to detect leaks... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
