Automotive Floor Mat Abrasion Tester，Automotive interior carpet abrasion tester

Whats/App: +86 156 1874 6768

Web: standard-groups.com

The Automotive Floor Mat Abrasion Tester is designed for evaluating the abrasion resistance of automotive floor mats and textile floor coverings. The tester simulates the repetitive friction generated by a driver’s heel during vehicle operation and quantitatively assesses material wear behavior under defined load and friction angle conditions.

The equipment is compact, mechanically stable, and easy to operate, making it suitable for routine testing in product development, quality control, and durability verification.

Application

The tester is used for abrasion performance evaluation of automotive interior floor coverings, including but not limited to:

(1) Textile automotive floor mats (tufted carpets, woven or nonwoven carpets)

(2) Rubber, polyurethane, and composite floor mats

(3) Passenger car and commercial vehicle floor coverings

(4) Comparative abrasion behavior of different materials and structures

(5) Development and validation of wear-resistant interior materials

(6) Automotive OEMs, component suppliers, interior material laboratories, and quality control departments

Standards

The tester is designed according to the following standard:

(1) PV 3934 – Abrasion testing of automotive floor coverings and floor mats

Customer-specific or internal standards can be implemented upon request.

Parameters

Item	Specification
Overall dimensions	560 × 520 × 430 mm
Weight	Approx. 65 kg
Test range	Adjustable friction distance / cycles, up to 100 cycles per unit (configurable)
Abrasion load	Adjustable via weights and crank mechanism
Friction angle	Adjustable, simulating heel contact angle
Power supply	Standard AC power or customer-specified configuration

Features

(1) Realistic abrasion simulation through adjustable load and friction angle

(2) Stable mechanical structure ensuring high repeatability of test results

(3) Simple mechanical adjustment using crank and locking nut mechanisms

(4) Safety protection with guard cover and Siemens safety switch

(5) Suitable for a wide range of floor mat materials, thicknesses, and sizes

Test Procedures

(1) Prepare and cut the floor mat sample with a flat backing surface

(2) Fix the sample on the test platform

(3) Adjust heel penetration depth to 5 ± 1 mm using the slotted nut

(4) Set abrasion load, friction angle, and number of cycles

(5) Start the test and allow the abrasion head to perform reciprocating motion

(6) Stop the test after completion and record wear condition

Maintenance Information

(1) Regularly inspect abrasion head and replace if excessive wear is observed

(2) Keep mechanical transmission parts clean and properly lubricated

(3) Check safety switch and protective cover before operation

(4) Store the equipment in a dry environment to prevent corrosion

Other supplier products

	Flame Retardant Testing Machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com It primarily evaluates the burning performance of fabrics by observing the rate at which fl...
	Building material products single combustion tester，BS 476 part 6 flame spread machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Information Single Burning Items(SBI), as a European evaluation of the fire-resist...
	Fiber Blend Ratio meter	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: It is used to measure the resistance value with a certain density un...
	Helmet Xenon Aging Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T2014-9-19. ISO 4892 ASTM G151. G154. D4329 d4587、d4799、sae j2020 Xenon la...
	Dry and Wet Retroreflectometer	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Dry and Wet Retroreflectometer, also known as the Dry and Wet Sand Abrasive Wear Testin...

All supplier products

Same products

	MMA-120 Handheld Arc Welder	Seller: 871183	The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
	SHX Series Circulating Fluidized Bed Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
	YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
	DHL Series Coal-Fired Steam Boilers	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
	SZL Series Biomass Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...