Expansion Tank Static Pressure Test Machine，High pressure expansion tank static tester

The Expansion Tank Static Pressure Test Machine is a specialized system designed to evaluate the static pressure performance and leak resistance of automotive expansion tanks. You can adjust the static pressure from 0 up to a maximum of 5 bar, while controlling the flow rate of each sample from 0 to 8 liters per hour. The system includes indirect chamber heating for safety (Explosion Protection Level 1), automatic leak detection, and fail-safe shutdown of defective samples, providing a reliable and efficient solution for expansion tank testing.

Application

The Expansion Tank Static Pressure Test Machine is suitable for a variety of automotive component testing applications:

Expansion Tanks: Evaluate static pressure resistance, leakage, and functional performance.

Coolant System Components: Test caps, valves, and connectors under controlled static pressure.

Material Durability Testing: Assess long-term reliability of plastic, metal, and composite tank materials.

Quality Control: Ensure compliance with OEM and supplier specifications for automotive cooling systems.

R&D and Certification Testing: Support component development, validation, and system integration.

Typical test products include automotive expansion tanks, coolant reservoir tanks, and associated components requiring static pressure evaluation.

Standards

The system supports compliance with major automotive engineering standards:

VW TL889 (4.1) – Volkswagen Group technical specification for interior and related component functional performance.

ESDG93-8A080-AA (3.6) – Ford engineering specification for component functionality and reliability.

GMW15310 (3.2.1.2) – General Motors global standard for material and component performance testing.

QV17004D (3.2.6) – BMW group specification for system component functionality and durability.

Parameters

Parameter Category	Details
Test Bench Dimensions	2200 × 2240 × 1550 mm (W × H × D)
Chamber Dimensions	1000 × 800 × 1000 mm (W × H × D)
Rated Power	9.5 kW
Test Medium	Glycol/Water
Pressure Range	0 … 5 bar
Flow Rate per Sample	0 … 8 l/h
Pressure Type	Static
Test Medium Temperature Range	25 … +150°C
Environmental Temperature Range	25 … +150°C
Test Channels	6

Features

Designed specifically for static pressure testing of expansion tanks.

Static pressure adjustable from 0 up to 5 bar.

Individual sample flow rate controllable from 0 to 8 l/h.

Explosion protection level 1 due to indirect chamber heating.

Automatic leak detection and leak testing with fail-safe shutdown of defective samples.

Automatic control of liquid level during testing.

Accessories

Indirectly heated test chamber

Flow control units for each sample

Leak detection sensors and safety interlocks

Liquid level monitoring and control system

Control unit with Windows/LabVIEW interface (optional for data logging)

Sample mounting brackets for expansion tanks

Test Procedures

Ensure the test area is clear and safe for operation.

Connect the system to the 9.5 kW power supply.

Fill the chamber and sample lines with glycol/water mixture.

Mount expansion tank samples in the test chamber.

Set the static pressure (0–5 bar) and flow rate (0–8 l/h) for each sample.

Activate the test system and indirect heating if required.

Monitor pressure, flow, and leak detection sensors throughout the test.

Automatically shut down any failed samples.

Record all test results for quality control or validation purposes.

After testing, safely drain the medium and allow the system to cool before removing samples.

Maintenance Information

Inspect sample mounting brackets, pressure sensors, and leak detection units before each test.

Verify flow control devices and chamber seals for proper operation.

Periodically calibrate pressure sensors and temperature controllers.

Clean the chamber and fluid circuits to prevent contamination.

Replace worn or defective components to maintain safe and accurate operation.

Other supplier products

	Building material flame retardancy test furnace	Technical parameters Gas used: methane flow rate (35 ± 0.5)L/min, its purity is greater than 95%, air flow rate (17±0.2)L/min Speci...
	Micro Controll Four-ball Friction Tester	The microcomputer-controlled four-ball friction testing machine uses a sliding friction method under point contact pressure conditions at the extre...
	Respirator Fit Tester	The Qinsun PortaCount Respirator Fit Tester assesses the overall integrity of masks by performing an aerosol leak test using the PortaCount particl...
	Direcct flame impingement Tester	Introduction The testerisdesignedaccording to the BS476-12:1991.Method of test for ignitability of products by direct flame impingement.The accura...
	Micro Controll Constant-Speed Friction Plate Tester	Standards GB5763-1998 brake linings for automobiles; GB/T5764-1998 brake linings for automobiles; GB/T5764-1998 brake linings for automobiles. ...

All supplier products

Same products

	Damp Freeze and Thermal Cycling Tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Damp Freeze and Thermal ...
	Alternative to BBA steady state solar simulator tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The BBA Steady-State Solar S...
	Alternative to PV Hail Impact Tester	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Hail Impact Test Machine...
	Solar Panel Insulation Resistance Test Chamber	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is applicable in ...
	90-Degree Peel Tester for PV Backsheets	Seller: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is suitable for e...