Automotive & Motorcycle Control Cable (Flexible Shaft) Fatigue TesterISO 6722
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Automotive & Motorcycle Control Cable (Flexible Shaft) Fatigue Tester is designed to evaluate the durability and fatigue performance of automotive and motorcycle control cables. By simulating repeated force and reciprocating motion experienced during actual use, it quantitatively assesses structural stability, service life, and reliability under defined loads and cycles, providing reliable data for design validation and quality control.
Application
This tester is applicable to a wide range of vehicle control cables and flexible shaft assemblies, including but not limited to:
(1) Automotive throttle cables
(2) Automotive clutch cables
(3) Automotive brake cables
(4) Automotive gear shift cables
(5) Automotive parking brake cables
(6) Motorcycle throttle cables
(7) Motorcycle clutch cables
(8) Motorcycle brake cables
(9) Bowden cables and flexible shaft assemblies
(10) Control cables for electric vehicles, light vehicles, and specialty vehicles
Suitable for: automotive manufacturers, motorcycle production facilities, cable/component manufacturers, third-party testing labs, and research institutions.
Standards
(1) QC/T 29101-92 — Automotive Cable Assemblies
(2) QC/T 228.10-1997 — Motorcycle and Moped Control Cable Test Method
(3) SAE J193 — Automotive Control Cable Reference Test Method
(4) ISO 6722 — Reference Principles for Cable and Component Durability Testing
Parameters
| Item | Technical Specification |
|---|---|
| Maximum Cable Load | 5000 N |
| Reciprocating Stroke | ±50 mm |
| Reciprocating Frequency | 30 / 60 cycles per minute |
| Test Cycle Range | 0–999.999 cycles |
| Test Cycle Accuracy | ±0.5% |
| Load Application | Pulley mechanism + standard weight + spring |
| Motion Conversion | Crank-slider mechanism |
| Drive | Dual-speed motor |
| Power Supply | AC 380V ±10% (3-phase) / AC 220V ±10% (single-phase) |
| Control | Electro-mechanical |
| Display | Digital counter display |
Features
(1) Standards-compliant design ensures reliable, repeatable test results.
(2) Wide load capacity up to 5000 N for most automotive and motorcycle cables.
(3) Stable reciprocating motion with crank-slider mechanism simulates real operating conditions.
(4) Accurate cycle counting with magnetic-electrical sensor and clear digital display.
(5) Adjustable stroke and frequency for different cable types and standards.
(6) Robust structure suitable for long-term continuous fatigue testing.
Accessories
| Name | Description |
|---|---|
| Pulley Assembly | Guides the cable along the test path |
| Standard Weights | Apply initial load to the cable |
| Standard Springs | Alternate load between initial and maximum force |
| Cable Fixtures | Secure cables of various sizes |
| Magnetic-Electric Sensor | Detects test cycle count |
| Power Cable | Supplies electrical power |
| Fasteners | Bolts, nuts, and connection components |
Test Procedures
(1) Mount the cable specimen along the standardized test path.
(2) Install pulleys, weights, and springs securely.
(3) Set reciprocating stroke and frequency according to the applicable standard.
(4) Start the machine; the cable undergoes cyclic loading between initial and maximum forces.
(5) Monitor test progress; system records the number of cycles.
(6) Stop the test automatically when preset cycles are reached or if cable failure occurs.
(7) Record all relevant data including cycles, load, and cable condition to generate the test report.
Maintenance Information
(1) Regularly inspect pulleys, weights, springs, and cable fixtures for wear or loosening.
(2) Keep moving parts clean and properly lubricated.
(3) Verify motor and control system operation periodically.
(4) Replace magnetic sensors or components if cycle counting becomes inaccurate.
(5) Ensure power supply and grounding are stable and compliant.
Send product request
Other supplier products
 |
Pressure Bubble Leak Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YY/T 0681.5 - 2010：Test methods for sterile medical device package - Part 5: Det... |
 |
Large Flame Flammability Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction The Flame Flammability Tester is developed according to the NFPA 701 Method 2... |
 |
Fabric light transmittance test machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Light transmittance test machine for fabric is used to determine the total visible light ... |
 |
Constant Strain Geomembrane Crack Resistance Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com In the field of materials science and engineering, environmental stress cracking testing ma... |
 |
Water Leak Detector | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Water Leak Detector primarily measures the volume and rate of gas released when a subst... |
Same products
 |
MMA-120 Handheld Arc Welder | Seller: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Seller: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
