BSS 7365Flame Spread Tester for Thermal and Acoustic Insulation Materials
The Flame Spread Tester for Thermal and Acoustic Insulation Materials is designed to evaluate the flame propagation characteristics of insulation and acoustic materials. You can expose samples to a standard thermal radiation source and ignite them with a controlled flame to determine their critical heat flux. This instrument is FAA-approved and compliant with international standards, providing accurate and repeatable measurements for aerospace, civil aviation, and material development applications.
Application
You can apply this tester in the following scenarios:
Aerospace material testing: Evaluate flame propagation of thermal and acoustic insulation materials in aircraft interiors.
Civil aviation compliance: Test materials in accordance with FAA FAR Part 25 Appendix F Part VI.
Material development: Assess thermal and acoustic insulation performance during R&D.
Quality control: Monitor flame spread properties in production lines to ensure safety compliance.
Compatible test standards and protocols: FAR Part 25 Appendix F Part VI, Airbus AITM 2.0053. Boeing BSS 7365. MH/T 6042‑2006. and relevant national standards.
Standards
This tester conforms to the following national and international standards:
GB/T 27904‑2011 — Test method for flame spread of interior decoration materials
GB/T 25207‑2010 — Classification of combustion performance of building decorative materials
GB 8624‑2012 — Classification of burning behavior of building materials and products
GB/T 16172‑2007 — Determination of heat release rate and total heat release of building materials and products (Cone Calorimeter Method)
BSS 7365 — UK aerospace standard for combustion and smoke density of aerospace composite and interior materials
AITM 2.0053 — European aerospace industry method for heat release rate and smoke evaluation
FAR Part 25 Appendix F Part VI — FAA regulatory requirement for flame propagation, smoke density, and toxicity in civil aircraft cabin materials
Parameters
| Parameter | Specification |
|---|---|
| Dimensions | 1220 × 570 × 520 mm; 1200 × 1150 × 1350 mm; 800 × 800 × 400 mm |
| Weight | 185 kg |
| Thermal Radiation Source | 400 VAC, 3-phase electric heating plate, PID control, ±0.1°C accuracy |
| Radiation Strip Width | 76 mm, six strips, operational up to 704°C |
| Sample Angle | 30° relative to horizontal plane |
| Ignition System | Axially symmetric propane burner, 0.15 mm nozzle |
| Burner Height | Flame at least 51 mm above sample plane |
| Flame Spread Measurement | Laser pointer for accurate monitoring |
| Thermocouple Placement | Back wall 279 mm, right wall 292 mm, below radiation plate 51 mm, ±2°C accuracy |
| Heat Flux Range | ≥60 kW/m², with self-circulating cooling water |
| Heat Flux Mounting | Steel plate 3.2 mm thick, with 3 × 25.4 mm insertion holes |
| Sample Holders | Standard and short versions (for hook-and-loop tests) |
| Data Acquisition | Computer and printer, automatic test timing ±0.1 s |
Features
Enclosed test chamber: Includes integrated chimney and controlled radiation environment.
Precision thermal radiation source: PID-controlled electric heating plate ensures uniform, stable heat flux.
Automated sample handling: Pneumatic sliding drawer allows easy sample insertion and removal.
Accurate ignition and flame monitoring: Propane burner with laser pointer ensures precise flame spread measurement.
Thermocouple monitoring: Accurately records sample and chamber temperatures at multiple points.
High-performance heat flux system: Measures critical heat flux for ignition and flame propagation.
Data acquisition and automation: Test time, flame spread, and other parameters are recorded automatically and with high precision.
Safety and repeatability: Controlled combustion and automated monitoring ensure consistent and safe testing conditions.
Accessories
Enclosed radiation test chamber with integrated chimney
3-phase electric heating plate with PID temperature control
Pneumatic sliding drawer for sample insertion and removal
Propane burner with 0.15 mm nozzle
Laser pointer for flame spread measurement
Thermocouples and mounting accessories
Water-cooled heat flux measurement system
Standard and short sample holders
Computer and printer with data acquisition system
Test Procedures
Install the sample in the test chamber using the pneumatic drawer and proper sample holder.
Connect the propane supply and compressed air system.
Activate the radiation source to achieve the desired thermal flux and preheat the sample.
Ignite the sample using the propane burner positioned 51 mm above the sample plane.
Monitor flame spread using the laser pointer and record temperature, heat flux, and ignition parameters via the data acquisition system.
Test duration is automatically recorded and ends at the set time or upon completion of flame propagation.
After testing, remove the sample and inspect the chamber for maintenance and cleaning.
Maintenance Information
Regularly clean the test chamber, radiation plate, and propane burner to ensure uniform heating and accurate measurements.
Calibrate thermocouples, heat flux system, and data acquisition equipment periodically.
Verify the pneumatic drawer and sample holders are operating smoothly.
Check propane and compressed air supplies before each test.
Maintain ambient temperature between 10–35°C for consistent testing conditions.
Send product request
Other supplier products
 |
Dental material color stability tester | Application The applications of color stability testers for dental materials are mainly reflected in the following aspects: Quality Control: Help... |
 |
Helmets Designated Protection Areas Tester | The helmet designated protection area testing device is a piece of equipment used to mark test points and lines on helmets, and is suitable for all... |
 |
Industrial chillers | Standards ASHRAE 15(Safety Standard for Refrigeration Systems) ISO 5149(Refrigerating Systems and Heat Pumps) UL 1995(Heating and Cooling Equi... |
 |
Furniture flammability tester | Furniture flammability tester is mainly used to test the combustion performance of mattress andupholstered bed. It’s suitable for bedspreads,... |
 |
Bearing Friction Torque Measuring Instrument | Bearing friction torque is an important factor affecting bearing noise, vibration, and lifespan, and is a key indicator for measuring the dynamic p... |
