Cabin Air Filter Test System（Particulate Filtration），Cabin Filter Efficiency Testing System

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Test system for testing particle separation of air filters for passenger compartments (DIN 71460-1. ISO/TS 11155-1). With the test system for cabin air filters acc. to DIN 71460-1 (particle filtration) all relevant filter performance parameters such as differential pressure drop, gravimetric or fractional filtration efficiency and dust holding capacity are determined.

The setup and configuration of the test system as well as the required test procedures are described in the standards DIN 71460-1 and ISO/TS 11155-1 for motor vehicle passenger compartment particle filtration.

Tests acc. to standards DIN 71460-2 and ISO 11155-2 can be carried out using PAF 112 test system for adsorptive cabin air filters.

For filter tests acc. to standards DIN 71460-1. ISO/TS 11155-1 and DIN 71460-2. ISO 11155-2 Topas has designed PAF 113 filter test system combining all features of test systems PAF 111 and PAF 112.

Applications

Differential pressure test

Analysis of fractional separation efficiencydust loading tests

Combined analyses according to DIN 71460-1 (ISO/TS 11155-1)

Customised tests

Standards

(1) GB/T 32085.1 — Automotive Air Conditioning Filters — Part 1: Dust Filtration Test

(2) ISO/TS 11155-1 — Road Vehicles — Cabin Air Filters — Part 1: Dust Filtration Test

(3) DIN 71460-1 — Road Vehicles — Passenger Compartment Air Filters — Part 1: Particulate Filter Test Methods

Features

Standard compliant testing of filter elements and filter mediamodular setup and instrumentation

Design on different flow rate and differential pressure ranges

High degree of automation

Traceable test documentation

Technical data

Parameter	Unit	Value
Test flow rate	m³/h	70 … 700 (higher flow rates on request)
Measuring range, differential pressure	Pa	0 … 1000
Compressed air supply (operating gas/air)	bar	6
Power supply	–	–
Test specimen dimensions	–	max. 300 × 600 mm
Aerosol generation technology	–	Dust disperser SAG 410/L, Atomizer ATM 220
Aerosol conditioning technology	–	Electrical Aerosol Neutralizer EAN 581
Aerosol measurement technology	–	Aerosol spectrometer
Sensors	–	Differential pressure, absolute pressure, temperature, relative humidity
System dimensions (W × H × D)	mm	4600 × 3400 × 1200

Accessories

Atomizer Aerosol Generator

Dust disperser

Laser Aerosol Spectrometer

Dilution system

Electrostatic Aerosol Neutralizer

Filter media adapter with sampling system

Additional pressure sensors

PAF111Win - test system control, data acquisition and processing software

Test Procedures

(1) Install the filter element or filter media sample and verify airtight sealing to prevent bypass leakage.

(2) Set the required test airflow according to the selected standard and allow the system to stabilize.

(3) Activate the aerosol generation system and adjust the concentration to the specified level.

(4) Measure upstream and downstream particle concentration and size distribution to calculate fractional filtration efficiency.

(5) Record the pressure drop across the filter simultaneously.

(6) For dust holding capacity tests, continuously load standard dust while monitoring pressure drop increase.

(7) Terminate the test when the specified end condition is reached and save all data.

(8) Generate and review the test report for performance evaluation and comparison.

Maintenance Information

Regularly calibrate airflow sensors, particle measurement instruments, and pressure transducers to maintain measurement accuracy.

Clean the test duct and aerosol paths after dust loading tests to prevent cross-contamination.

Inspect seals, adapters, and connections periodically to ensure system airtightness.

Replace protection filters and consumables according to usage conditions and standard recommendations.

Maintain the aerosol generators and neutralization devices in accordance with manufacturer guidelines.

Other supplier products

	Catheter Guidewire Friction Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This tester is suitable for a wide range of medical devices and scenarios, inc...
	Flooring Materials Abrasion Resistance Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D3884(Abrasion Resistance of Textile Fabrics) ISO 5470-1(Rubber or Plastics...
	Automatic oxidizing liquid tester apparatus	Whats/App: +86 156 1874 6768 Web: standard-groups.com Conforms to UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Cr...
	UV fade meter Si48 for textile testing	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com UV Long-Life Auto Fade Meter is extensively used for colour fastness test of ...
	Vacuum Cleaner Filtration Efficiency Testing Equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com TheVacuum Cleaner Filtration Efficiency Testing Equipmentis designed for precise evaluation...

All supplier products

Same products

	HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line	Seller: Shandong HUASU Plastic Technology Co.,Ltd.	The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi...
	PanEVAP & MVR system	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...