Sandbag Mechanical Load Testing Machine
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
The machine is widely used for mechanical performance testing and structural verification of PV modules:
Photovoltaic Module Load Testing: Static and dynamic load endurance evaluation.
Environmental Simulation: Wind, snow, and ice load testing.
Structural Safety and Compressive Strength Verification: Ensuring module stability under stress.
Installation Scheme Optimization: Evaluating mounting reliability and performance.
Electrical Continuity Monitoring: Real-time detection of short circuits and circuit integrity.
Standardized Laboratory Testing: For wind and solar energy experiment labs.
Certification Testing: Compliant with IEC 61215. IEC 61646. UL 1703. IEC 62782.
Standards
The machine is designed to comply with international and domestic PV module mechanical testing standards:
GB/T 9535 series – Mechanical Load Testing of Photovoltaic Modules
IEC 61215 – Crystalline Silicon PV Module Design Qualification and Type Approval
IEC 61646 – Thin-Film PV Module Design Qualification
IEC 62782 – Mechanical Load Testing of PV Modules under Snow and Wind
UL 1703 – Safety Standard for Photovoltaic Modules
Parameters
| Item | Technical Parameter |
|---|---|
| Machine Dimensions | L 280 × D 180 × H 195 cm |
| Forward Load | 5400 Pa (adjustable) |
| Reverse Load | 2400 Pa (adjustable) |
| Cycle Count | Programmable |
| Dynamic Load Frequency | 7 s ±3 s |
| Dynamic Load | 1000 Pa × 1000 cycles |
| Pressure Control Accuracy | ±5% |
| Force System | Sandbag + low-friction cylinder + tension/compression sensor (0.1 N accuracy) |
| Frame Material | Aluminum profile structure with electrophoretic surface treatment |
| Max Test Size | 2000 × 1000 mm (customizable) |
| Custom Fixtures | Adjustable according to module installation |
| Electrical Continuity System | DC 150 V / 2 A, real-time monitoring |
| Number of Cylinders | 8 (4 sets × 2) |
| Cylinder Force per Set | >200 kg |
| Cylinder Stroke | 150 mm |
| Suction Cups | 32 (8 sets × 4) |
| Suction Cup Diameter | 120 mm |
| Suction Cup Spacing | ≤200 mm (horizontal/vertical) |
| Suction Cup Joint Rotation | ≥15° |
Features
Combines sandbag static load and cylinder dynamic load to simulate real environmental conditions.
Aluminum frame provides uniform force distribution; electrophoretic surface treatment ensures durability.
Maximum test size 2000×1000 mm; custom sizes available.
Custom fixtures allow flexible adaptation to different module installation methods.
Electrical continuity system ensures module circuitry safety during testing.
Mature upper computer software with user-friendly interface; supports Chinese and English.
Real-time display of pressure, deformation, cycle count, and electrical continuity.
Automatic pressure stabilization to target values, with continuous monitoring.
Data storage and report generation in Word, Excel, PDF, and JPG formats.
Fault warning system provides alerts and operational guidance for safe operation.
Send product request
Other supplier products
 |
Yellowing resistance test chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com The yellowing resistance test chamber, a key testing device in the field of materials scien... |
 |
Automated TPS and Hot Disk thermal conductivity analyzer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is widely used for thermal characterization of: Metals, alloys, an... |
 |
20L Spherical Explosion Tester，ASTM E1226 alternative to explosion tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com 20L Spherical Explosion Tester is characterized by accurate test data and ease of use. Its ... |
 |
Bending Test device | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Pure Bending Tester analyzes hand movements-referred to as "bending"-performed by artis... |
 |
Flame Retardant Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com It primarily evaluates the burning performance of fabrics by observing the rate at which fl... |
