Sandbag Mechanical Load Testing Machine
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
The machine is widely used for mechanical performance testing and structural verification of PV modules:
Photovoltaic Module Load Testing: Static and dynamic load endurance evaluation.
Environmental Simulation: Wind, snow, and ice load testing.
Structural Safety and Compressive Strength Verification: Ensuring module stability under stress.
Installation Scheme Optimization: Evaluating mounting reliability and performance.
Electrical Continuity Monitoring: Real-time detection of short circuits and circuit integrity.
Standardized Laboratory Testing: For wind and solar energy experiment labs.
Certification Testing: Compliant with IEC 61215. IEC 61646. UL 1703. IEC 62782.
Standards
The machine is designed to comply with international and domestic PV module mechanical testing standards:
GB/T 9535 series – Mechanical Load Testing of Photovoltaic Modules
IEC 61215 – Crystalline Silicon PV Module Design Qualification and Type Approval
IEC 61646 – Thin-Film PV Module Design Qualification
IEC 62782 – Mechanical Load Testing of PV Modules under Snow and Wind
UL 1703 – Safety Standard for Photovoltaic Modules
Parameters
| Item | Technical Parameter |
|---|---|
| Machine Dimensions | L 280 × D 180 × H 195 cm |
| Forward Load | 5400 Pa (adjustable) |
| Reverse Load | 2400 Pa (adjustable) |
| Cycle Count | Programmable |
| Dynamic Load Frequency | 7 s ±3 s |
| Dynamic Load | 1000 Pa × 1000 cycles |
| Pressure Control Accuracy | ±5% |
| Force System | Sandbag + low-friction cylinder + tension/compression sensor (0.1 N accuracy) |
| Frame Material | Aluminum profile structure with electrophoretic surface treatment |
| Max Test Size | 2000 × 1000 mm (customizable) |
| Custom Fixtures | Adjustable according to module installation |
| Electrical Continuity System | DC 150 V / 2 A, real-time monitoring |
| Number of Cylinders | 8 (4 sets × 2) |
| Cylinder Force per Set | >200 kg |
| Cylinder Stroke | 150 mm |
| Suction Cups | 32 (8 sets × 4) |
| Suction Cup Diameter | 120 mm |
| Suction Cup Spacing | ≤200 mm (horizontal/vertical) |
| Suction Cup Joint Rotation | ≥15° |
Features
Combines sandbag static load and cylinder dynamic load to simulate real environmental conditions.
Aluminum frame provides uniform force distribution; electrophoretic surface treatment ensures durability.
Maximum test size 2000×1000 mm; custom sizes available.
Custom fixtures allow flexible adaptation to different module installation methods.
Electrical continuity system ensures module circuitry safety during testing.
Mature upper computer software with user-friendly interface; supports Chinese and English.
Real-time display of pressure, deformation, cycle count, and electrical continuity.
Automatic pressure stabilization to target values, with continuous monitoring.
Data storage and report generation in Word, Excel, PDF, and JPG formats.
Fault warning system provides alerts and operational guidance for safe operation.
在线联系供应商
Other supplier products
 |
High-precision Material Thermal Conductivity Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction It adopts the internationally popular method of heat flow meter to detect t... |
 |
Sliding bearing PV friction testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The testing machine can monitor the changes in friction force and the wear condition of the... |
 |
High Precision Car Seat Comfort Testing System for Ergonomic & Dynamic Performance Evaluation | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features Simulates vertical and horizontal dynamic loads on automotive seats... |
 |
ASTM F963 Toy Burning Tester for Certification Laboratories | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Feature 1.PLC control, timing precision, hu... |
 |
Micro Rapid Closed Cup Flash Point Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Reference Standards： SH/T 0768. SN/T 3077.1. DL/T 1354. ASTM D6450 SN/T 3077.2. ASTM D7094... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
