Automated Clutch Friction Test Machine

Produced by: Standard Groups

All supplier products

Get a quote：

Web: qinsun-lab.com

Email：info@qinsun-lab。com

The Automated Clutch Friction Test Machine is used for the following applications and components:

Wet clutch friction plate friction coefficient and torque characterization

Wear and durability evaluation of clutch friction materials

Engagement and disengagement behavior analysis under cyclic loading

Testing of small-scale friction components such as thrust washers

Friction performance assessment of limited-slip differential components

Evaluation of synchronizer and torque converter friction elements

Lubricant and friction material development and validation

Thermal behavior and heat dissipation studies of friction interfaces

Research, development, and quality control in automotive and transmission industries

Standards

GB/T 13986 — Determination of Friction Characteristics of Automotive Wet Clutches

JASO M349 — Test Method for Wet Clutch Performance

ISO 6312 — Automotive Clutch Friction Performance Testing

SAE J2491 — Clutch Friction and Wear Test Method

ASTM D3703 — Determination of Friction Properties of Friction Materials

Item	Technical Parameters
Friction pair size	Mean friction radius 35–125 mm
Maximum specimen diameter	286 mm
Small specimen friction radius	15 mm
Speed control ratio	100:1
Drive motor	AC motor, 4 kW, encoder feedback
Load range (low load)	50 – 1,000 N
Load range (high load)	250 – 10,000 N
Load actuation	Pneumatic bellows, closed-loop control
Torque measurement	Strain gauge torque transducer
Maximum torque	180 Nm
Torque arm radius	187 mm
Heating method	Electrical resistance heating
Heating power	3 kW
Temperature range	40 – 200 °C
Temperature sensor	Type K thermocouple
Cooling method	Circulating heat transfer fluid
Cooling flow rate	Up to 4 L/min
Controlled parameters	Speed, load, temperature, test duration
Measured parameters	Speed, load, friction torque, temperature, friction coefficient, time
Power supply	380/415 V, three phase, 50/60 Hz
Compressed air	4 cfm @ 8 bar
Cooling water	10 L/min (typical)
Machine dimensions	600 × 800 × 1,000 mm
Machine weight	400 kg

	Seatbelt Webbing Abrasion Tester ASTM D6770	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com This benchtop-style tester allows operators to assess the decrease in webbing stre...
	Rubbing Color Fastness Tester	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Application This instrument is applicable to the test of color fastness in textil...
	Friction and Wear Test Machine	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Friction and Wear Testing Machine is a precision instrument designed to measur...
	Aerosol Sensor Test System	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Aerosol Sensor Test System is designed for development, testing, and calibrati...
	Rolling Bearing Tribometer	Get a quote： Email：info@qinsun-lab。com Web: qinsun-lab.com The Rolling Bearing Tribometer is used for the following applications and test object...

PanEVAP & MVR system	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
PanGAP wide gap welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
PanBloc welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
PanBox welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...
PanPHE gasketed plate heat exchangers	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ...