Automated Clutch Friction Test Machine
Get a quote：
Web: qinsun-lab.com
Email：info@qinsun-lab。com
The Automated Clutch Friction Test Machine is used for the following applications and components:
Wet clutch friction plate friction coefficient and torque characterization
Wear and durability evaluation of clutch friction materials
Engagement and disengagement behavior analysis under cyclic loading
Testing of small-scale friction components such as thrust washers
Friction performance assessment of limited-slip differential components
Evaluation of synchronizer and torque converter friction elements
Lubricant and friction material development and validation
Thermal behavior and heat dissipation studies of friction interfaces
Research, development, and quality control in automotive and transmission industries
Standards
GB/T 13986 — Determination of Friction Characteristics of Automotive Wet Clutches
JASO M349 — Test Method for Wet Clutch Performance
ISO 6312 — Automotive Clutch Friction Performance Testing
SAE J2491 — Clutch Friction and Wear Test Method
ASTM D3703 — Determination of Friction Properties of Friction Materials
Parameters
| Item | Technical Parameters |
|---|---|
| Friction pair size | Mean friction radius 35–125 mm |
| Maximum specimen diameter | 286 mm |
| Small specimen friction radius | 15 mm |
| Speed control ratio | 100:1 |
| Drive motor | AC motor, 4 kW, encoder feedback |
| Load range (low load) | 50 – 1,000 N |
| Load range (high load) | 250 – 10,000 N |
| Load actuation | Pneumatic bellows, closed-loop control |
| Torque measurement | Strain gauge torque transducer |
| Maximum torque | 180 Nm |
| Torque arm radius | 187 mm |
| Heating method | Electrical resistance heating |
| Heating power | 3 kW |
| Temperature range | 40 – 200 °C |
| Temperature sensor | Type K thermocouple |
| Cooling method | Circulating heat transfer fluid |
| Cooling flow rate | Up to 4 L/min |
| Controlled parameters | Speed, load, temperature, test duration |
| Measured parameters | Speed, load, friction torque, temperature, friction coefficient, time |
| Power supply | 380/415 V, three phase, 50/60 Hz |
| Compressed air | 4 cfm @ 8 bar |
| Cooling water | 10 L/min (typical) |
| Machine dimensions | 600 × 800 × 1,000 mm |
| Machine weight | 400 kg |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Automotive Seat Three-Station Headrest and Backrest Static Strength Testing Machine | ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Automotive Seat Three-Station Headrest and Backrest Static Strength Testing Ma... |
 |
Air Intake Filter Performance Test System | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com The Air Intake Filter Test System is designed to ev... |
 |
Sweating Guarded Hotplate | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com G259A Sweating Guarded Hotplate is the most professional, most advanced Thermal an... |
 |
Thermal Protective Performance Tester (TPP) | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Thermal Protective Performance (TPP) Test Device was developed to measure the ... |
 |
Vacuum Cleaner Full-Unit Charge-Discharge Life Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheVacuum Cleaner Full-Unit Charge-Discharge Life Testeris designed for long-term ... |
