Ultraviolet Aging Test Chamber
Get a quote：
Web: qinsun-lab.com
Email：serving@qinsun-lab。com
Ultraviolet Aging Test Chamber is a laboratory testing system specifically designed for photovoltaic module ultraviolet preconditioning. The chamber simulates long-term outdoor exposure of photovoltaic modules to solar ultraviolet radiation, reproducing UV-induced material aging effects under controlled conditions. By accelerating natural ultraviolet exposure in a laboratory environment, the equipment enables evaluation of ultraviolet aging impacts that would normally take months or years outdoors, supporting verification of UV resistance and structural reliability of photovoltaic modules and encapsulation materials.
Standards
(1)IEC 61215 Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
(2)IEC 61646 Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
Parameters
| Item | Technical Specification |
|---|---|
| Structural material | High UV-blocking, high-sealing, high-thermal-insulation specialized material |
| Total UV irradiation area | ≥2000 mm × 2000 mm |
| Maximum test capacity | Simultaneous testing of 2 photovoltaic modules (2 m × 1 m each) |
| Light source type | Xenon lamp |
| Lamp lifetime (single set) | Approx. 1000 h |
| Spare lamps | 1 set (standard configuration) |
| System cumulative service life | ≥2000 h |
| UVA / UVB energy ratio | UVB accounts for approx. 3%–10% of total energy |
| Irradiance intensity | Approx. 100 W/m² in the 280–385 nm range |
| 280–320 nm proportion | ≤10% |
| Irradiance uniformity | Better than ±15% |
| UVA probe | 320–385 nm, fiber-optic type |
| UVB probe | 280–320 nm, fiber-optic type |
| Module surface temperature | 60 ℃ ±5 ℃ |
| Temperature resolution | 0.1 ℃ |
| Temperature measurement accuracy | ±0.1 ℃ |
| Ozone generation | Negligible |
| Irradiation method | Top irradiation, light source vertically directed at module surface |
| Control mode | Touchscreen control with automatic monitoring and light source cut-off |
Send product request
Other supplier products
 |
Safety Helmet Molten Metal Splash Resistance Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Safety Helmet Molten Metal Splash Resistance Tester is designed in accordance ... |
 |
Taber Abrasion Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Application Suitable for testing the surface abrasion resistance of flat material... |
 |
Ozone aging chamber | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Ozone Aging Chamber G280 is designed to evaluate the color fastness and durabi... |
 |
Glow wire tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com F242 Glow-wire tester simulates thermal stress from heat sources to test circuit c... |
 |
Cleanable Filter Media Test System | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Cleanable Filter Media Test System is designed for characterizing cleanable fi... |
Same products
 |
Metal Angular Fixator Testing Machine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Metal Angular Fixator Testing Machine... |
 |
Bone Plate Four-Point Bending Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Plate Four-Point Bending Fatigue... |
 |
Bone Plates Static Four - point Bending Tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Plates Static Four-Point Bending... |
 |
Spinal Internal Fixation System Assembly Testing Machine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spinal Internal Fixation System Assem... |
 |
Spinal Internal Fixation System Component Testing Machine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spinal Internal Fixation System Compo... |
