Benchtop BS 5852 combustion tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
BS 5852 combustion test equipment is mainly used to determine the flame retardant properties of soft furniture. It’s widely and conveniently use.
Furniture industry: Assessing combustion performance of mattresses, sofas, and related furniture materials.
Fire safety: Providing reaction data of furniture materials under fire for testing organizations.
Quality control: Supporting manufacturers in performance evaluation and certification compliance.
Research institutions: Studying combustion characteristics of new flame-retardant materials.
Standards
◆UK Regulation British furniture (fire and safety) regulations test
◆BS 5852 Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources
◆CFR 1634 Standard for the flammability of residential upholstered furniture; Proposed rule.
◆ISO 11925-2 – Reaction to fire tests for furniture
Parameters
|
Test mode |
Automatic |
|
Test flow |
(45±2)m1/min |
|
Air pressure |
|
|
The length of air pipe |
Length 2.5~3mm, Inner diameter 7±1mm |
|
Timer |
0~999s |
|
Power supply |
AC 220V 50/60HZ |
|
Dimensions |
570x310x440mm(L x W x H) |
|
Weight |
20kg |
Test Procedures
This test must be conducted in a laboratory with standard airflow. The upholstery and filling materials are placed in a test apparatus to create a small sofa with a base and backrest measuring 90°. An ignition source is placed at the connection between the sofa's base and backrest. There are six different ignition sources, numbered 2-7. where 2-3 are gas combustion sources and 4-7 are wood combustion sources (higher numbers represent more intense ignition sources within the group).
During the gas combustion process, the smoldering time from the start should not exceed 30 minutes (60 minutes for wood combustion sources). If the test does not demonstrate charring in all directions beyond 100mm above the ignition source, the gas flame should be removed after 40 seconds (ignition source 2) or 70 seconds (ignition source 3). If there is no flame, it is permissible to continue for more than 120 seconds after the removal of the combustion tube. If there is no flame, it is permissible to continue for 10 minutes after the start of the test for ignition source 5 (13 minutes for ignition sources 6-7).
Send product request
Other supplier products
 |
Direcct flame impingement Tester with BS 476-12，Surface spread of flame test | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction: The testeris designedaccording to the BS476-12:1991.Method of test for ignit... |
 |
Automated humidifying bottle tester equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The humidifier bottle performance tester is mainly used to detect various pro... |
 |
Demesia Zigzag Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Demesia Zigzag Tester is a professional device used to test the flexural resistance of ... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performanc... |
 |
Bone Screw Static Torque Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0591-2011: Chinese standard specifying torsion testing methods for intramedu... |
