Automated Wet leakage current test system of photovoltaic module
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
The system is suitable for electrical safety and insulation performance testing of photovoltaic modules in simulated wet environments, including:
Electrical insulation testing of crystalline silicon PV modules (monocrystalline and polycrystalline)
Wet leakage current evaluation of thin-film PV modules (CIGS, CdTe, a-Si, etc.)
Design qualification and type testing of photovoltaic modules
Routine quality control testing during PV module production
Reliability and safety performance verification of PV modules
Type approval testing in third-party testing institutes and certification laboratories
Insulation structure evaluation during PV module R&D
Photovoltaic safety performance research in universities and research institutions
Standards
The Wet Leakage Current Test System is designed to meet the requirements of the following standards:
(1) GB/T 9535 – Crystalline Silicon Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
(2) GB/T 20047 – Photovoltaic (PV) Module Safety Qualification Requirements
(3) IEC 61215 – Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
(4) IEC 61730 – Photovoltaic (PV) Module Safety Qualification (relevant clauses on insulation and electrical safety)
Parameters
| Item | Technical Specification |
|---|---|
| Test Tank Dimensions | 2100 × 1000 × 250 mm (W × D × H) |
| Tank Material | Acrylic (Organic Glass) |
| Tank Thickness | 15 mm |
| Water Temperature Control Range | 22 ± 3 ℃ |
| Temperature Control Method | Self-developed water constant-temperature system |
| Test Liquid Resistivity | ≤ 3500 Ω·cm |
| Spray Method | Multi-angle adjustable spray |
| Spray Nozzle Type | UL laboratory dedicated spray nozzles |
| Spray Water Pressure / Flow | Adjustable |
| Maximum Test Voltage | 0–5000 V (adjustable) |
| Leakage Current Limit | 5 mA |
| Voltage Ramp Rate | 500 V/s |
| Insulation Resistance Range | 1 MΩ – 9999 MΩ |
| Leakage Current Measurement Range | 0.001 – 5.000 mA (DC) |
Accessories
(1) Dielectric Withstand Voltage Tester (0–5000 V output)
(2) Water Constant-Temperature System with independent control cabinet
(3) Acrylic Insulation Test Water Tank
(4) Adjustable Multi-angle Spray Frame
(5) UL Dedicated Spray Nozzles
(6) Conductivity Meter for monitoring water resistivity
(7) PV Module Sample Holder
(8) Test Water (configured according to resistivity requirements)
(9) Sensors and Probes (for periodic calibration or replacement)
Send product request
Other supplier products
 |
Water Leak Detector | The Water Leak Detector primarily measures the volume and rate of gas released when a substance reacts with water, used to determine the packaging ... |
 |
Battery Test Chamber丨Battery Test mechine | Features and Benefits 1.Wide temperature range (-70℃ to +150℃),temperaturefluctuation ≤±0.5℃, Humidity control accuracy±2%RH,th... |
 |
Catheter Mechanical Strength Measuring System | Product Introduction The Urinary Catheter Strength Tester is designed to determine the physical strength characteristics of urinary catheters, ser... |
 |
Suture Needle Cutting Force Tester | Applications Evaluating Cutting Performance: By measuring the cutting force required for suture needles to penetrate simulated tissues, the cuttin... |
 |
Desktop Xenon lamp aging test chamber | TheXenon lamp aging test chamberis a photoaging tester for large-capacity textile testing. With additional sample light frame, temperature sensor a... |
Same products
 |
Damp Freeze and Thermal Cycling Tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Damp Freeze and Thermal ... |
 |
Alternative to BBA steady state solar simulator tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The BBA Steady-State Solar S... |
 |
Alternative to PV Hail Impact Tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Hail Impact Test Machine... |
 |
Solar Panel Insulation Resistance Test Chamber | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is applicable in ... |
 |
90-Degree Peel Tester for PV Backsheets | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is suitable for e... |
