Automated Wet leakage current test system of photovoltaic module
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
The system is suitable for electrical safety and insulation performance testing of photovoltaic modules in simulated wet environments, including:
Electrical insulation testing of crystalline silicon PV modules (monocrystalline and polycrystalline)
Wet leakage current evaluation of thin-film PV modules (CIGS, CdTe, a-Si, etc.)
Design qualification and type testing of photovoltaic modules
Routine quality control testing during PV module production
Reliability and safety performance verification of PV modules
Type approval testing in third-party testing institutes and certification laboratories
Insulation structure evaluation during PV module R&D
Photovoltaic safety performance research in universities and research institutions
Standards
The Wet Leakage Current Test System is designed to meet the requirements of the following standards:
(1) GB/T 9535 – Crystalline Silicon Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
(2) GB/T 20047 – Photovoltaic (PV) Module Safety Qualification Requirements
(3) IEC 61215 – Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
(4) IEC 61730 – Photovoltaic (PV) Module Safety Qualification (relevant clauses on insulation and electrical safety)
Parameters
| Item | Technical Specification |
|---|---|
| Test Tank Dimensions | 2100 × 1000 × 250 mm (W × D × H) |
| Tank Material | Acrylic (Organic Glass) |
| Tank Thickness | 15 mm |
| Water Temperature Control Range | 22 ± 3 ℃ |
| Temperature Control Method | Self-developed water constant-temperature system |
| Test Liquid Resistivity | ≤ 3500 Ω·cm |
| Spray Method | Multi-angle adjustable spray |
| Spray Nozzle Type | UL laboratory dedicated spray nozzles |
| Spray Water Pressure / Flow | Adjustable |
| Maximum Test Voltage | 0–5000 V (adjustable) |
| Leakage Current Limit | 5 mA |
| Voltage Ramp Rate | 500 V/s |
| Insulation Resistance Range | 1 MΩ – 9999 MΩ |
| Leakage Current Measurement Range | 0.001 – 5.000 mA (DC) |
Accessories
(1) Dielectric Withstand Voltage Tester (0–5000 V output)
(2) Water Constant-Temperature System with independent control cabinet
(3) Acrylic Insulation Test Water Tank
(4) Adjustable Multi-angle Spray Frame
(5) UL Dedicated Spray Nozzles
(6) Conductivity Meter for monitoring water resistivity
(7) PV Module Sample Holder
(8) Test Water (configured according to resistivity requirements)
(9) Sensors and Probes (for periodic calibration or replacement)
在线联系供应商
Other supplier products
 |
Floor material combustion tester | Scope of application The floor material combustion test device is suitable for all kinds of floor materials, such as textiles, carpets, cork board... |
 |
Rubber Resilience Tester | Standard Complies withISO 4662:1986(international),JIS K6255(Japan), andGB/T 1681(China) standards for standardized resilience testing of vulcaniz... |
 |
Computer-controlled Helmet Impact Tester | A computer-controlled helmet impact tester is an instrument used to test the impact resistance and penetration resistance of helmets. It quantitati... |
 |
Medical Injection Needle Stiffness Measuring Device | Standard GB 18457-2001 This standard mandates precise control over needle wall thickness (normal, thin, ultra-thin) and rigidity performance, dir... |
 |
Fire and Smoke Toxicity Analysis Equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The ASTM E1678 Combustion smoke toxicity tester is used for smoke toxicity tes... |
Same products
 |
Damp Freeze and Thermal Cycling Tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Damp Freeze and Thermal ... |
 |
Alternative to BBA steady state solar simulator tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The BBA Steady-State Solar S... |
 |
Alternative to PV Hail Impact Tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Hail Impact Test Machine... |
 |
Solar Panel Insulation Resistance Test Chamber | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is applicable in ... |
 |
90-Degree Peel Tester for PV Backsheets | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is suitable for e... |
