.

Damp Freeze and Thermal Cycling Tester

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Application

The Damp Freeze and Thermal Cycling Test Chamber is suitable for:

Damp-freeze and temperature cycling performance testing of PV modules

Environmental adaptability evaluation during R&D

Type certification and qualification testing of PV modules

Indoor laboratory simulation of outdoor temperature and humidity cycles

Quality control and factory performance verification of PV modules

Scientific research and environmental durability studies

Standards

The chamber complies with the following international standards:

(1) GB/T IEC 61215 – Crystalline Silicon Terrestrial Photovoltaic Modules – Design Qualification and Type Approval

(2) UL 1703 – Safety Standard for Photovoltaic Modules

Parameters

ItemTechnical Specification
Temperature Range -40~85℃
Temperature Fluctuation ≤±1℃
Temperature Deviation ≤±1℃
Temperature Uniformity ≤±2℃
Heating/Cooling Rate Compliant with IEC 61215 requirements
Humidity Range 30~98%RH
Relative Humidity Deviation ±3%FS; 85±2%RH; 90±2%RH
Humidity Fluctuation ±2%RH
Humidity Uniformity ≤2%RH
Thermal Cycling Performance Module surface temperature change ≤100℃/h, minimum extreme temperature holding time ≥10 minutes, single test up to 200 cycles or 50 loops
Sample Capacity Up to 12 PV modules
Inner Chamber Size 1.5 × 2.5 × 1.5 m (L×W×H)
Outer Chamber Size 2.5 × 3.0 × 2.5 m (L×W×H)
Inner Material SUS#304 high-temperature resistant mirror stainless steel
Outer Material Anti-rust steel with powder coating
Insulation High-density rigid PU foam + glass wool
Control System Automatic program control; independent heating/humidifying/dehumidifying/cooling
Display Panel Touchscreen, real-time curves of set and actual values
Communication Interface RS-485. supports software data storage, printing, and download
Interface Language English/Chinese switchable
Refrigerant HFC environmentally friendly, auto-switching valve
Power Supply 380V, 50/60Hz

Accessories

(1) Damp Freeze and Thermal Cycling Test Chamber Main Unit – inner/outer chamber, control and refrigerant systems

(2) Touchscreen Display and Control Panel – real-time curve monitoring and program control

(3) RS-485 Communication Interface – data storage, printing, and networking

(4) Sample Holder – accommodates up to 12 PV modules

(5) Consumable Refrigerant – HFC environmentally friendly type

(6) Consumable Insulation – PU foam and glass wool

(7) Optional Data Recording and Analysis Software – online logging and visualization


Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Photovoltaic environmental acid mist chamber ASTM B117 standard
Photovoltaic environmental acid mist chamber ASTM B117 standard Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com The Photovoltaic Acid Mist Test Chamber is a specialized environmental simula...
Spray Aerosol Ignition Distance Tester
Spray Aerosol Ignition Distance Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description Conforms to UN Recommendations on the Transportation of Dangerous Good...
Fabric Touch Cool Feeling Tester
Fabric Touch Cool Feeling Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Fabric Cooling Sensation Tester is used to evaluate the instant cooling sensa...
Best abrasion tester for water-based paint
Best abrasion tester for water-based paint Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com The Wet Abrasion Scrub Tester is designed to evaluate the resistance of paint...
Automated Filtration Systems for Hydraulic Oil
Automated Filtration Systems for Hydraulic Oil Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards You can operate this device in compliance with international and domestic standa...
All supplier products

Same products

ER4043 Silicon Aluminum Welding Wire
ER4043 Silicon Aluminum Welding Wire Seller: 868776 Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate...
Choosing the Right Equipment for Heavy-Duty Cleaning
Choosing the Right Equipment for Heavy-Duty Cleaning Seller: Taizhou Feike Mechanical Technology Co., Ltd. FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve...
ER4043 Silicon Aluminum Welding Wire
ER4043 Silicon Aluminum Welding Wire Seller: 868776 Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin...
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line Seller: Shandong HUASU Plastic Technology Co.,Ltd. The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi...
PanEVAP & MVR system
PanEVAP & MVR system Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...