Laboratory continuous load surface performance tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
Adhesion strength evaluation of surface coatings
Measurement of friction resistance between coatings and contact tools
Scratch resistance testing of thin and thick film coatings
Peeling resistance assessment under continuously increasing load
Surface performance characterization of films, coatings, and laminated structures
Typical test samples include:
Thin and thick coating layers
Painted and varnished surfaces
Polymer films and sheets
Decorative panels and laminated materials
Coated metal or non-metal substrates
Standards
GB/T 6040-2008 Test Method for Wear Resistance of Metal Surfaces
GB/T 17657-2022 Test Methods of Evaluating the Properties of Wood-Based Panels and Surface-Finished Panels (including abrasion and scratch tests)
ISO 20502 Fine Ceramics and Coatings — Scratch and Wear Testing
ISO 1518 Paints and Varnishes — Determination of Resistance to Scratching
ASTM D3702 Test Method for Wear Rate of Materials Using a Rotating Drum Apparatus
ASTM D1894 Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
JIS P 8139 Determination of Friction and Wear Properties of Coatings
JIS P 8147 Determination of Surface Friction Coefficient and Scratch Properties of Coatings
JIS K 7317:2022 Plastics — Film and Sheeting — Determination of Coefficient of Friction
Parameters
| Parameter | Specification |
|---|---|
| Sliding speed | 60 – 600 mm/min |
| Sliding distance | 1 – 50 mm |
| Motion mode | SINGLE mode: stops automatically after preset distance |
| REPEAT mode: reciprocating motion, up to 9.999 cycles | |
| Load range | 0 – 100 gf / 0 – 1000 gf |
| Vertical load | 0 – 50 g / 0 – 500 g |
| Maximum sample size | 220 × 100 mm, thickness up to 8 mm |
Test Procedures
Secure the test specimen on the moving stage.
Install the appropriate scratch needle or test head.
Set sliding speed, travel distance, load range, and motion mode.
Perform automatic zero calibration before testing.
Start the test to apply continuous vertical loading during linear motion.
Record friction resistance, scratch behavior, and peeling response in real time.
Determine critical load values corresponding to surface damage or coating failure.
Maintenance Information
Clean the moving stage and scratch needle after each test
Inspect load sensors regularly to maintain measurement accuracy
Check continuous loading mechanisms for smooth operation
Keep electrical components protected from dust and moisture
Store accessories and weights properly to prevent mechanical damage
Send product request
Other supplier products
 |
OEM fuel cell filter testing equipment factory | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Fuel Cell Air Intake Filter Test System is designed to evaluate air intak... |
 |
Bone Plates Static Four-Point Bending Tester | ISO 9585 ASTM F382 | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard (1)YY/T 0342-2022: Chinese standard specifying methods for determin... |
 |
High precision 5th percentile female ATD for laboratory testing | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The 5th Percentile Female Crash Test Dummy serves as a surrogate for a real h... |
 |
Femoral Stem Fatigue Performance Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0809.4 (China): Specifies fatigue testing protocols for femoral stems in par... |
 |
Large Scale Vertical Fire Resistance Test Furnace，Long-lasting fire resistance furnace for coatings | Whats/App: +86 156 1874 6768 Web: standard-groups.com Description Fire resistance performance of materialprovideimportant information for evalua... |
