Automated TPS and Hot Disk thermal conductivity analyzer
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
The tester is widely used for thermal characterization of:
Metals, alloys, and graphite
Thermal pastes, silicone, and rubber
Ceramics and composite ceramic materials
Polymers, paper, fabrics, foams, and insulation materials
Concrete, composite panels, and paper honeycomb structures
Anisotropic materials
Typical applications include:
Rapid thermal property testing in R&D and quality control laboratories
Characterization of high and low conductivity materials
Evaluation of thermal behavior in powders, pastes, liquids, coatings, and thin films
Thermal analysis of construction, aerospace, electronics, and insulation materials
Standards
ISO 22007-2:2015 – Determination of Thermal Conductivity and Thermal Diffusivity of Solids by Transient Plane Source (TPS) Technique
GB/T 32064-2015 – Thermal Conductivity Test Method Using Transient Plane Source (TPS) Technique
Parameters
| Item | Specification |
|---|---|
| Thermal conductivity range | 0.001–500 W/(m·K); resolution 0.0001 W/(m·K) |
| Thermal diffusivity range | 0.1–100 mm²/s |
| Heat storage coefficient | 0.1–30 W/(m²·K) |
| Specific heat | 0.1–5 kJ/(kg·°C) |
| Thermal resistance | 0.5–0.000005 mm²·K/W |
| Temperature measurement accuracy | ≤0.0001 °C |
| Measurement relative error | ≤3% |
| Repeatability error | ≤3% |
| Test duration | 1–120 seconds |
| Sample environment temperature | -40–150 °C (standard); optional -50–250 °C, vacuum environment available |
| Probe diameter | Standard Φ15 mm; optional Φ30 mm, Φ15 mm, Φ7.5 mm, Φ4 mm |
| Sample types | Solid blocks, powders, pastes, liquids, coatings, thin films, insulation materials, anisotropic materials |
| Automation | Full software-controlled measurement, parameter analysis, and report output |
| Power supply | AC 220 V ±10%, 50/60 Hz; total power <500 W |
| Form factor | Integrated compact unit, desktop installation |
Accessories
Main instrument
Analysis software (Chinese & English versions)
Two quartz reference samples
Accessory kit: paste, powder, and liquid test holders; sample fixture for solid materials
Send product request
Other supplier products
 |
Air filter System（ISO 16890/EN 779） | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Testing of general air filters according to ISO 16890 Standard ISO 16890.EN... |
 |
Color Spectrum Analyzer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement s... |
 |
Bending Tester STD- FB2 - S | Whats/App: +86 156 1874 6768 Web: standard-groups.com Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength ... |
 |
Wire Swing Bending Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Wire Swing Bending Tester is designed to simulate bending and swinging conditions that ... |
 |
Cleanable Filter Media Testing Rig | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Quality assurance of flat sheet filter media in terms of a final clearance an... |
