Walk-In Composite Salt Spray Test Chamber

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Applications

1. Automotive Industry

Testing the corrosion resistance of complete vehicles, bodies, chassis, and new energy vehicle battery packs in coastal and frigid regions is a critical validation step for export model development.

2. Aerospace and Defense

Evaluating the reliability of aircraft components and military equipment under high salt fog and extreme temperature/humidity conditions ensures service life.

3. Large Structural Components

Simulating harsh environments like chemical plants and marine atmospheres to validate long-term corrosion resistance for items such as corrosion-resistant pipelines, photovoltaic modules, and ship components.

Standards

GMW 14872 Simulating the Corrosion Resistance of Automotive Components in Alternating Salt Spray, Humidity, and Dry Environments

GJB 150.11A Salt Spray Testing for Military Equipment

GB/T 10125-2021 Artificial Atmosphere Corrosion Testing—Salt Spray Test

ASTM B117 Simulating Complex Corrosion Environments (Marine, Chemical, etc.) to Evaluate Material or Coating Corrosion Resistance

ISO 9227:2022 Corrosion tests under artificial climatic conditions—Salt spray test

ASTM G85 Standard Test Method for Modified Salt Spray Test

GB/T 2423.17 Salt spray test for electrical and electronic products

GB/T 2423.18 Combined salt spray test

Features

1. Composite Environmental Simulation

Integrates multiple environmental stresses including salt spray (neutral NSS, acetic acid AASS, copper-accelerated CASS modes), temperature-humidity cycling (-40°C to 150°C, humidity 30% to 98% RH), and drying/condensation cycles. Simulates real-world corrosion scenarios such as marine atmospheres and industrial pollution zones.

2. Large-Scale Testing Capacity

Chamber dimensions typically range from 10–18m (L) × 3–5m (W) × 3–4m (H), accommodating large components like complete vehicles, body-in-white, and battery packs. Supports walk-through or lift platform designs for easy sample loading/unloading.

3. High-Precision Control and Intelligent Operation

Salt deposition is precisely controlled at 1–2 mL/80 cm²/h, with temperature fluctuations ≤±0.5°C and humidity deviation ≤±5% RH.

Equipped with a touchscreen programmable system supporting multi-mode cyclic testing (e.g., salt spray-damp heat-dry cycles), delivering high automation.

4. Corrosion-Resistant Structural Design

Interior walls utilize corrosion-resistant materials like PVC, FRP, or PP. Exterior shells are constructed from stainless steel or carbon steel with anti-corrosion coatings. Select models feature double-walled insulation to minimize heat loss.

Parameters

Item	Specifications	Features
Working Chamber Dimensions	10–18 m (L) × 3–5 m (W) × 3–4 m (H)	Customizable, suitable for whole vehicles or large components
Salt Spray Modes	Switchable between NSS/ASS/CASS modes	Meets different corrosion intensity requirements
Temperature Range	-40°C ~ 150°C (higher in some expanded models)	Supports combined temperature-humidity and salt spray tests
Salt Spray Settling Rate	1–2 mL/80 cm²/h, digitally displayed and automatically adjustable	Complies with GB/T 10125. ASTM B117. and other standards
Safety Protection	Over-temperature protection, water shortage alarm, leakage protection	Prevents sample damage

Test Procedures

1. Equipment Preparation

Verify chamber structural integrity and safety interlocks.

Check water supply, salt solution concentration, and salt spray generator operation.

Arrange samples securely on racks or lifting platforms.

2. Parameter Configuration

Select the desired salt spray mode (NSS/ASS/CASS).

Set temperature and humidity ranges, along with cycle duration.

Activate automated monitoring and data acquisition.

3. Test Execution

Start the chamber and monitor temperature, humidity, and salt spray deposition rates.

Perform cyclic testing according to programmed schedules.

Ensure safety alarms are active throughout the test.

4. Test Completion

Gradually return chamber to ambient conditions.

Remove samples carefully and analyze corrosion performance data.

Other supplier products

	Computer-controlled Helmet Impact Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com A computer-controlled helmet impact tester is an instrument used to test the impact resista...
	Steaming Cylinder	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for s...
	Fabric Friction Charge Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Fabric Friction Charge Tester is a precision instrument designed to measure the electro...
	Battery Isothermal Calorimeter	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description Battery Isothermal Calorimeter is a professional instrument developed ...
	Gravel Resistant Impact Tester/Stone chip tester，ISO 20567，automatic gravel impact tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application 1. Automotive Industry Vehicle Body Coating Testing: Testing the chip resista...

All supplier products

Same products

	HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line	Seller: Shandong HUASU Plastic Technology Co.,Ltd.	The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi...
	PanEVAP & MVR system	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...