Advanced Jet Fuel Performance Test Equipment
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The system supports compliance with international and domestic standards for aviation fuel system testing:
FIRE TEST HANDBOOK: Chapter 12 – Material and component fire testing methods.
ISO 8217 – Aviation turbine fuel specifications.
ISO 11170 – Aircraft fuel pump performance testing.
ASTM D1655 – Aviation turbine fuel standards.
ASTM D3241 – Fuel combustion performance and low-temperature testing.
SAE AS22771 – Aviation engine fuel system component testing.
SAE AS1241 – Fuel pump performance and durability tests.
FAR Part 33 – Aircraft engine airworthiness, including fuel system design and testing.
FAR Part 23 / Part 25 Appendix F – Fire resistance and performance requirements for fuel systems in transport and general aviation.
DEF STAN 91-091 – UK Defense fuel system performance testing.
EUROCAE ED-79 / ED-79A – Aircraft engine fuel system certification and testing.
BSS Series (e.g., BSS 7220) – Fuel system material flammability and compatibility evaluation.
Parameters
| Parameter Category | Details |
|---|---|
| Dimensions | 1500 mm (W) × 1800 mm (H) × 900 mm (D) |
| Weight | 150 kg |
| Fuel Requirement | Aviation kerosene |
| Compressed Air Requirement | ≥ 120 PSI |
| Power Supply | 220 V, 10 A |
| Operating Temperature | 10°C – 35°C |
| Sample Mounting | Horizontal and vertical installation supported |
Features
Burner cone made from corrosion-resistant, high-temperature alloy.
NexGen Aviation Fuel Burner includes diffuser, fuel nozzle, igniter, fuel rail, mounting bracket, ventilation duct, housing, silencer, and acoustic barrier.
Equipped with fuel pressure gauge, fuel solenoid valve, fuel temperature sensor, air regulator, and air temperature sensor.
Fuel and air temperature control baths (≥ 2 × 0.14 m³) maintain stable combustion conditions.
Adjustable fuel nozzle and air pressure allow compliance with multiple test standards.
Insulation blankets cover fuel lines and burner body for safety and heat containment.
Supports modular NexGen burner system units for flexibility.
Heavy-duty steel frame supports horizontal and vertical sample installation.
Calibration employs seven 1.6 mm diameter, ceramic-coated, metal-sheathed, grounded K-type thermocouples (AWG 30. 0.0507 mm² cross-section, 361 Ω/km), mounted on an angle-iron thermocouple comb.
Heat flux sensors with cooling system, mounted on fixed supports for accurate measurement.
Accessories
NexGen Aviation Fuel Burner with full assembly
Fuel and air temperature control baths
Fuel solenoid valve and pressure gauge
Igniter assembly
Adjustable fuel nozzle
Insulation blankets and acoustic silencer
Heavy-duty steel mounting frame
Thermocouple comb for calibration
Heat flux sensors with cooling system
Test Procedures
Ensure the installation area is clear and safe.
Connect the system to a 220 V, 10 A power supply.
Supply aviation kerosene fuel and compressed air ≥ 120 PSI.
Mount the test sample securely on the horizontal or vertical frame.
Apply insulation blankets to fuel lines and burner housing.
Adjust fuel nozzle and air pressure according to the selected test standard.
Activate the igniter and NexGen fuel burner.
Monitor fuel flow, air pressure, flame temperature, and heat flux using sensors.
Conduct automated combustion tests on propulsion components.
Record all data for compliance reporting and analysis.
Shut off fuel and air supply and allow the system to cool before sample removal.
Maintenance Information
Inspect the burner cone, fuel nozzle, and igniter for corrosion or wear before each test.
Check fuel and air lines for blockages or leaks.
Periodically calibrate thermocouples and heat flux sensors.
Clean insulation blankets and acoustic components as needed.
Replace any worn or damaged safety components immediately to maintain operational safety.
Send product request
Other supplier products
 |
Humidity heat chamber for pv modules | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Damp Heat Test Chamber is suitable for: Damp-heat performance testing of ... |
 |
Backsheet bonding strength tester for solar modules | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The tester is designed to comply with international and national standards: (1)... |
 |
Constant Elongation Tensile Stress Tester ISO 13934 | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Usage Constant tensile stress meter is an instrument to determine the tensil... |
 |
Cosmetic UV protection tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Instrument Purpose: Used to evaluate the protective performance of cosmetics against solar... |
 |
Safety Helmets Wearing Stability Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB 811-2022: Safety Helmets – General Technical Requirements GB 24429-2009... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
