IMO Flame Spread Test Apparatus for Marine Materials
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The apparatus complies with the following standards:
(1) GB/T 28752-2012 – Test Method for Lateral Flame Spread on Vertical Surfaces
(2) ISO 5658-2 – Reaction to Fire Tests — Spread of Flame — Part 2: Lateral Spread on Building Products in Vertical Configuration
(3) IMO Resolution A.653(16) – Surface Flammability of Bulkhead, Ceiling and Deck Finish Materials
(4)ASTM E1317
Parameters
| Item | Specification |
|---|---|
| Methane Calibration Burner | 1 kW and 3 kW flame output |
| Radiant Panel Size | 480 mm × 280 mm |
| Ambient Temperature Range | 10 °C to 35 °C |
| Calibration Gas | Methane |
| Combustion Gas | Propane or Methane |
| Power Supply | 220 V, 10 A |
| Equipment Dimensions (Standard) | 1100 mm × 1100 mm × 1700 mm |
| Equipment Dimensions (Optional) | 1530 mm × 900 mm × 1650 mm |
| Equipment Weight | 128 kg |
| Measured Parameters | Critical heat flux, ignition heat, total heat release |
Features
Comprehensive Fire Performance Measurement
Simultaneous evaluation of flame spread rate, ignition heat, critical heat flux, heat release rate, and sustained combustion heat.
Accurate Gas Flow Control
Equipped with a propane mass flow controller and Venturi gas mixer to ensure stable and precise combustion conditions.
Efficient Cooling System
Portable water-circulation cooling unit effectively removes heat from the heat flux sensor, maintaining measurement stability.
Video Monitoring and Data Recording
Integrated camera monitors the entire test process and stores measurement status for traceability.
Automated Control System
Standard testing software enables automated operation, minimizing operator influence and improving test repeatability.
High-Precision Radiant Heat Flux Measurement
Built-in water-cooled radiant heat flux sensor accurately records radiant heat distribution curves.
User-Friendly Operation
Adjustable observation window allows clear visual monitoring of flame spread, combined with a foot switch for automatic data recording.
Accessories
(1) Methane gas cylinder (user supplied, purity ≥95%)
(2) Propane gas cylinder (user supplied)
(3) Mass flow controller set
(4) Water-cooling circulation unit
(5) Ceramic tube burner
(6) Thermocouple set
(7) Glass observation window with foot switch
(8) Video monitoring system
(9) Adjustment unit including rotameter
Test Procedures
Install the test specimen securely onto the specimen holder in a vertical position.
Select the appropriate combustion gas and set the required gas flow rate.
Start the system and verify the operational status of sensors and gas components.
Initiate the flame spread test; the system applies radiant heat and pilot flame automatically.
The software records flame spread rate, ignition heat, heat release, and related parameters.
After completion, shut off the gas supply and clean the test area in preparation for the next test.
Maintenance Information
Regularly inspect gas pipelines, valves, and flow controllers for leakage or blockage.
Clean the radiant panel surface and observation window to maintain measurement accuracy.
Ensure the water-cooling system operates properly and replace coolant as required.
Calibrate heat flux sensors and thermocouples periodically according to standard procedures.
Store the apparatus in a dry, well-ventilated environment when not in use.
Send product request
Other supplier products
 |
Powder Wet Vibrating Screen System For Lithium Battery Material Testing | The Powder Wet Vibrating Screen System is designed for particle size separation and distribution analysis of lithium battery materials under wet co... |
 |
Helmets Vertical SpacingInfrared - positioning Tester | The helmet vertical spacing infrared positioning tester is a specialized instrument used to measure the vertical spacing and wearing height of safe... |
 |
Hot Cold Chamber | Features and Benefits 1.Hotcoldchambercan range from very low temperatures ( -70 ° C or lower) to high temperatures (+180 ° C or higher) t... |
 |
Room corner fire testing equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can use this apparatus in the following scenarios: Full-scale fire perfor... |
 |
Automatic freezing point pour point cold tester | Product Introduction: The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other f... |
Same products
 |
ISO 29463 HEPA/ULPA filter performance testing System | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system supports and compli... |
 |
High-Precision ISO 16890 Filter Media Test Rig for R&D and QC | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system can execute and com... |
 |
Mobile Floor Scrubber Aging Life Tester IEC 60312 | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheMobile Floor Scrubber Aging L... |
 |
ISO 12103 Cleanable Filter Media Test System | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system complies with: (1)... |
 |
Robotic Vacuum Cleaners Edge-Following Tester | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheEdge-Following Test Equipment... |
