Blade penetration tester for staplers
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
YY/T 1797 - 2021： Surgical blades - Test method for sharpness and cutting performance
Features
1.Industrial-grade 7-inch capacitive touchscreen with a menu-driven interface for easy and intuitive operation.
2.Professional software design with multi-level access control for convenient laboratory management and standardized equipment use.
3.Supports remote upgrades and maintenance.
4.Equipped with a miniature printer for easy printing of test results.
Technical Parameters
| Parameter | Specification |
|---|---|
| Testing Accuracy | ±0.01N |
| Testing Speed | 0.05–600mm/min (Some models may vary, e.g., 600mm/min±30mm/min) |
| Testing Material | Complies with the 3-0 uncoated silk-like twisted strand suture specified in YY0167-2005 (or other standard testing materials) |
| Power Supply | 220V 50Hz; Overall Power Consumption: 70W (or other values) |
| External Dimensions | 400×290×275mm (or other dimensions) |
| Net Weight | 15kg (or other values) |
Accessoriess
Standard configuration: Main unit, mini printer
Optional accessories: Professional software, communication cable
Test Procedures
1. Pre-test Preparation
Check the instrument's power supply (220V 50Hz) and component connections to ensure they are functioning correctly. Start the instrument and allow it to warm up to a stable operating state;
Calibrate the force sensor (ensuring an accuracy of ±0.01N), and prepare the test materials (such as 3-0 uncoated silk twisted suture as specified in YY0167-2005).
2. Sample and Test Medium Installation
Fix the stapler blade to be tested onto the instrument's dedicated fixture, ensuring the blade angle, position, and cutting path are aligned and there is no looseness/offset;
Install the test medium (such as standard suture) onto the cutting platform, adjusting its position to precisely align with the cutting edge of the blade.
3. Test Parameter Settings
Using the touchscreen interface, select the appropriate standard (YY/T 1797-2021), set the test speed (e.g., 0.05–600 mm/min), data acquisition frequency, and other parameters. Confirm and save the configuration.
4. Starting the Test
After confirming that the blade and medium are correctly positioned, click the "Start" button. The instrument will automatically simulate the cutting process, collecting and displaying cutting force, displacement, and other data in real time.
5. Test Process Monitoring
Observe the data changes on the interface to ensure that there are no abnormalities during the cutting process (such as blade jamming or medium displacement). If problems occur, pause and adjust immediately.
6. Test Completion and Cleanup
After the test is completed, the instrument will automatically shut down. Record/export the sharpness-related data (such as initial cutting force and displacement curve);
Loosen the fixture to remove the blade and remaining test medium, clean the fixture and cutting platform, turn off the instrument's power, and prepare the test report.
Send product request
Other supplier products
 |
Laboratory Comprehensive Surface Performance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 3960-2016 Plastics – Determination of Sliding Wear Properties ASTM G... |
 |
Spectrophoto meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement s... |
 |
Surface Flame Spread Test Apparatus，ASTM E162 Flame propagation test apparatus | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Surface Flame Spread Test Apparatus is a high-precision instrument designed for evaluat... |
 |
ISO 12103 Cleanable Filter Media Test System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system complies with: (1) VDI 3926-2 – Test guideline for cleanable f... |
 |
Oxidizing Solids Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description Conforms to UN Recommendations on the Transport of Dangerous Goods - M... |
