Blade penetration tester for staplers

• 

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

YY/T 1797 - 2021： Surgical blades - Test method for sharpness and cutting performance

Features

1.Industrial-grade 7-inch capacitive touchscreen with a menu-driven interface for easy and intuitive operation.

2.Professional software design with multi-level access control for convenient laboratory management and standardized equipment use.

3.Supports remote upgrades and maintenance.

4.Equipped with a miniature printer for easy printing of test results.

Technical Parameters

Accessoriess

Standard configuration: Main unit, mini printer

Optional accessories: Professional software, communication cable

Test Procedures

1. Pre-test Preparation

Check the instrument's power supply (220V 50Hz) and component connections to ensure they are functioning correctly. Start the instrument and allow it to warm up to a stable operating state;

Calibrate the force sensor (ensuring an accuracy of ±0.01N), and prepare the test materials (such as 3-0 uncoated silk twisted suture as specified in YY0167-2005).

2. Sample and Test Medium Installation

Fix the stapler blade to be tested onto the instrument's dedicated fixture, ensuring the blade angle, position, and cutting path are aligned and there is no looseness/offset;

Install the test medium (such as standard suture) onto the cutting platform, adjusting its position to precisely align with the cutting edge of the blade.

3. Test Parameter Settings

Using the touchscreen interface, select the appropriate standard (YY/T 1797-2021), set the test speed (e.g., 0.05–600 mm/min), data acquisition frequency, and other parameters. Confirm and save the configuration.

4. Starting the Test

After confirming that the blade and medium are correctly positioned, click the "Start" button. The instrument will automatically simulate the cutting process, collecting and displaying cutting force, displacement, and other data in real time.

5. Test Process Monitoring

Observe the data changes on the interface to ensure that there are no abnormalities during the cutting process (such as blade jamming or medium displacement). If problems occur, pause and adjust immediately.

6. Test Completion and Cleanup

After the test is completed, the instrument will automatically shut down. Record/export the sharpness-related data (such as initial cutting force and displacement curve);

Loosen the fixture to remove the blade and remaining test medium, clean the fixture and cutting platform, turn off the instrument's power, and prepare the test report.

Другие товары поставщика

	Filter Media Testing Equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Filter media testers are widely used in quality control and production managem...
	Anchoring force guide pin device	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The device is designed to meet the following standards: (1) YY/T 0880-2013: Dis...
	Color Spectrum Analyzer	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement s...
	Rotary Reciprocating Friction Wear Testing Machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications You can use this tester to: Evaluate the tribological performance of materia...
	Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of pen...

Похожие товары

	Metal Angular Fixator Testing Machine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Metal Angular Fixator Testing Machine...
	Bone Plate Four-Point Bending Fatigue Testing Machine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Plate Four-Point Bending Fatigue...
	Bone Plates Static Four - point Bending Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Plates Static Four-Point Bending...
	Spinal Internal Fixation System Assembly Testing Machine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spinal Internal Fixation System Assem...
	Spinal Internal Fixation System Component Testing Machine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spinal Internal Fixation System Compo...