Custom Humidifying Bottle Performance Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
YY/T 1610 - 2018：Anaesthetic and respiratory equipment - Oxygen humidifiers for medical use
Features
• Supports leakage, pressure resistance, humidification output, and overflow testing functions for humidification bottles.
• 7-inch color touchscreen control and intuitive interface significantly enhance the user experience.
• The device is equipped with a miniature printer for real-time printing of test results.
• Equipped with a high-precision pressure sensor, allowing for stable control of output pressure via a rotary pressure knob.
• Equipped with a high-precision flow meter for accurate measurement of flow rate through the tubing.
• Features a 20° tilt design device to accommodate observation at various angles for different specifications.
• Utilizes a universally designed conical test interface to meet the testing requirements of most products on the market.
• The device has a powerful data storage function, capable of storing up to 50.000 data entries.
• Miniature printer and universal USB data interface facilitate data output and transfer.
• Intelligent features such as overload protection and power-off memory effectively ensure user safety.
• Optional GMP "Computerized Systems" compliant testing software is available, featuring user management, permission management, and data audit trail functions.
Technical Parameters
| Parameter | Specification |
|---|---|
| Working Range | Usually between 0 and 1000KPa; some models may offer higher pressure options (e.g., 2000KPa or 2500KPa) |
| Flow Accuracy | ±1%, ensuring the accuracy of testing |
| Power Supply | Generally 220V, 5A, 50Hz |
| Instrument Operating Voltage | Usually 220V |
| Air Source Requirements | Adjustable from 0 to 2MPa; the air source needs to be provided by the user |
| Main Unit Dimensions | Vary depending on the model; e.g., some models: 570×400×200mm (Length×Width×Height) |
| Other Functions | Some advanced-model humidifier bottle performance testers may have features like micro-computer control, large touch-screen display, Chinese menu settings, digital preset test flow, and printing function (making operation more intuitive and convenient) |
Accessoriess
Standard configuration: electronic control unit, testing unit, printer
Test Procedures
1. Pre-test Preparation
Check that the instrument's power supply (220V, 5A, 50Hz) is functioning correctly, and confirm that the external gas source (0-2MPa) is connected and adjustable;
Calibrate the flow sensor (ensuring an accuracy of ±1%), clean the instrument interfaces and tubing to ensure the test pathway is unobstructed.
2. Humidifier Bottle Sample Installation
Remove the humidifier bottle to be tested, check its appearance for damage, and connect the humidifier bottle to the instrument's test tubing according to the interface specifications;
Seal the connection between the humidifier bottle and the instrument, ensuring there is no risk of leakage at the interface (low-pressure gas can be pre-applied to initially verify the seal).
3. Test Parameter Settings
Select the test item (e.g., leak test, pressure test, humidification output test) via the instrument's touchscreen;
According to the YY/T 1610-2018 standard, set the corresponding test parameters: such as pressure test pressure, pressure holding time, test flow rate, etc., and save the parameters after confirmation.
4. Starting the Test
After confirming that the humidifier bottle connection and parameter settings are correct, click the "Start" button, and the instrument will automatically execute the corresponding test procedure (e.g., the leak test will monitor pressure changes, and the pressure test will stably maintain the set pressure);
During the test, the instrument will display pressure, flow rate, and other data in real time.
5. Test Process Monitoring
Observe whether the data on the instrument interface is stable. For leak tests, pay close attention to whether the pressure drops abnormally; for pressure tests, confirm that the humidifier bottle is not deformed or ruptured;
If abnormal data or equipment alarms occur, pause the test immediately and troubleshoot the problem (e.g., interface leakage, unstable gas source).
6. Test Completion and Cleanup
After the test is completed, the instrument will automatically shut down, and the test results will be recorded (e.g., whether the leakage is qualified, whether the pressure resistance value meets the standard);
Disconnect the gas source, loosen the humidifier bottle interface, remove the sample, clean the instrument tubing and interfaces, turn off the equipment power, and prepare the test report.
Send product request
Other supplier products
 |
Contact heating and cooling test device | Whats/App: +86 156 1874 6768 Web: standard-groups.com The sensation of coldness or warmth when skin touches a fabric is referred to as the "coldn... |
 |
Cleanliness Analysis System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Production： The cleanliness analysis system fully complies with the requirements of standa... |
 |
Affordable Sand - Falling Testing Machine for Motorcycle Helmets | Whats/App: +86 156 1874 6768 Web: standard-groups.com The sand abrasion tester is a specialized testing device used to evaluate the abrasion resi... |
 |
Mattress Fatigue Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Mattress Rollator is a laboratory durability testing system designed to e... |
 |
OSU Rate of Heat Release Apparatus for Aircraft and Aerospace Fire Safety Testing | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Parameters Parameter CategoryDetails Dimensions 760 mm (W) &time... |
