Digital TPP Calibration Equipment

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

(1) BS EN ISO 6942 – Protective clothing – Protection against heat and flame – Method of test for the determination of heat transfer on exposure to a heat source

(2) EN 366 – Protective clothing against heat and flame – Resistance of materials to contact heat

(3) EN 407 – Protective gloves against thermal risks (heat and/or fire)

(4) ISO 11612 – Protective clothing – Clothing to protect against heat and flame

(5) ASTM F1939 – Standard Test Method for Evaluation of Thermal Protective Performance of Materials for Clothing

(6) ASTM F2702 – Standard Test Method for Heat Transfer and Thermal Protective Performance of Flame Resistant Clothing Materials Using a Thermal Protective Performance Tester

(7) NFPA 1971 – Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting

(8) NFPA 2112 – Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire

(9) GB 38543 – Technical Specification for Fire Protection of Workwear for Industrial Personnel

(10) GB/T 38306 – Test Method for Thermal Protective Performance of Flame Retardant Protective Clothing

Feature

Standard calorimeter mounting block.

PLC control system provides stable and fast testing performance.

Analysis software with user friendly interface is easy to use and installed Stoll curve model internally.

Compact structure design reduces the requirements of fume hood.

Evaluates the potential for skin burns associated with a fabric’s ability to block convective and

radiant heat penetration

Automatic test operation provides repeatable and precise results

Independently controlled radiant heat source and convective heat source

Supports up to three copper disk calorimeter sensor assemblies

Integrated air-cooled sensor stand quickly prepares calorimeter sensor for next test

Water-cooled shutter is pneumatically actuated for precise exposure control

Automatically predicts time to second degree burn, with results shown as a real-time numerical and graphical display of sample performance compared to the Empirical Performance Curve

Small and portable, the TPP test device fits in most standard fume hood

Technical Parameters

Heat Flux Measurement Range	0–167 kW/m²
Heat Flux Measurement Accuracy	±2 kW/m²
Specimen Irradiated Size	≥200mm*200mm,for testing flame-retardant protective clothing, fire-fighting suits and protective gloves
ConvectionHeatSource	2Merkel lamps (Heat flux: up to 60 kW/m²; Radiant heat flux: up to 40 kW/m²)
Rotor Propane Gas Flowmeter	Provides precise, stable propane flow for the burner
Radiant Heat Source	9pcs of500W infrared quartz lamps (proportional power controlfor0–30 kW/m²radiant heat flux)
ASTM F2703Copper Calorimeter	Accuracy±3% F.S.;Weight 1000±10 g
Copper Calorimeter Copper Plate	Imported Oxygen-Freesuperconductingcopper
Data Acquisition System Sampling Rate	≥20samples/second
Environment	15–35℃
Fume Hood	Recommended internal dimensions ≥150×75×90 cm, including door height
Gas Source	Propane (Purity≥95%, equipped with pressure reducing valve - cylinder & outlet pressure controlled)
Compressed Air	Customer-supplied
Cooling Water Source	Tap water (inlet & outlet) or optional chiller
Power supply	Single phaseAC220V 50Hz
Dimension	130×65×53cm (LXWXH)
Weight	Around 60kg

Test Procedures

Sample Conditioning: Cut specimens according to standard requirements and pre-treat them under specified conditions (e.g., drying at 105°C).

Specimen Mounting: Secure the specimen in a 45-degree fixture, ensuring the surface is flat and wrinkle-free.

Thread Ignition Cord: Install marked cotton cord at the designated position on the specimen and attach the timing weight or sensor.

Flame Adjustment: Ignite the butane gas and precisely adjust the flame height to 16mm using the scale.

Ignition Initiation: Press the start button; the ignition burner automatically moves toward the specimen and ignites it (typically retracting after 1 second).

Data Reading: When the sample burns to the marked line and melts the cotton thread, the timer automatically stops. Record the displayed spread time.

Maintenance Information

Timely Carbon Removal: After each test, promptly clean carbon deposits and combustion residues from the burner and sample holder to prevent gas line blockage.

Gas Line Sealing: Periodically inspect gas source connection hoses with soapy water to ensure no gas leaks.

Sensor Cleaning: Maintain cleanliness of the flame-detection device to prevent ash ingress causing timing failure.

Environmental Ventilation: Conduct tests within a fume hood. Activate exhaust systems post-test to remove hazardous fumes.

Other supplier products

	ISO Automotive Connector Force Test Equipment	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com TheAutomotive Connector Insertion and Withdrawal Force Testing Machineis desi...
	Catheter bending resistance test device	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product introduction The tester is composed of a programmable controller, a touch screen, ...
	Bone Fixation Device Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com A Bone Screw Pull-out Tester is a specialized testing device used to measure the pull-out s...
	ASTM E659 Liquid autoignition point tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Liquid Autoignition Point Tester is a device used to determine the lowest temperature a...
	Rubber non-rotor vulcanization Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Rubber Non-Rotor Vulcanization Tester is a precision instrument designed for the rubber...

All supplier products

Same products

	Composite Flame Retardant For Adhesive XS-FR- 308/XS-FR-708	Seller: Zhejiang Xusen Flame Retardants Incorporated Company	XS-FR-308/XS-FR-708 are nitrogen phosphorus composite, low smoke intumescentflame retardants, whi...
	Nylon High Strength Sewing Thread	Seller: Hangzhou Fantex Textile Co., Ltd	Nylon high strength sewing thread(nylon thread) selects high toughness nylon filament as raw mate...
	HMPE Yarn	Seller: Hangzhou Fantex Textile Co., Ltd	Fantex high strength polyethylene yarn is a premium HMPE Yarn(High Modulus Polyethylene Yarn), re...
	Nylon Fishing Twine	Seller: Hangzhou Fantex Textile Co., Ltd	Our nylon fishing twineis made from high tenacity nylon twine , ensuring a long-lasting and relia...
	High Tenacity Polyester Bonded Thread	Seller: Hangzhou Fantex Textile Co., Ltd	High Tenacity Polyester Bonded Threadis a kind of industrial filament sewing thread made of high ...