Precision Reciprocating Friction and Wear Tester Type 02
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
ASTM G99 – Standard Test Method for Wear Testing
ASTM G133 – High-Temperature Friction and Wear Test Method
ISO 20808 – Solid Material Friction and Wear Test
GB/T 3147 – Determination of Friction Material Wear Performance
Technical Specifications
| Parameter | Specification |
|---|---|
| Maximum Reciprocating Frequency | 20 Hz (continuously adjustable), 30 Hz (optional) |
| Maximum Stroke | 40 mm |
| Maximum Friction Force | 100 N |
| Maximum Load | 200 N |
| Friction Pair Types | Pin-on-disk, Ball-on-disk, Cylinder-on-block |
| Test Duration Control | 1 s – 9999 h |
| Lifting Height | 25 mm |
| High-Temperature Module (Optional) | Room temperature – 600℃ |
Features
High-Frequency Testing: Reciprocating frequency up to 20 Hz, supporting high-speed wear experiments
Large Stroke Range: Maximum stroke 40 mm, suitable for various friction pairs and test conditions
High-Precision Measurement: Friction force up to 100 N, load up to 200 N, ensuring accurate testing
Multiple Friction Pairs: Supports pin-on-disk, ball-on-disk, cylinder-on-block configurations
Temperature Control: Optional high-temperature module allows testing up to 600℃
Full Automation: Controlled via industrial computer and software, with automated data recording and report generation
Safety Features: Equipped with overload shutdown and alarm functions to protect you and the equipment
Accessories
| Name | Description |
|---|---|
| High-Temperature Module | For tests up to 600℃ |
| Friction Pair Materials | Pin-on-disk, ball-on-disk, cylinder-on-block, etc. |
| Temperature Sensors | Monitor temperature during high-temperature testing |
| Lubricants | For friction tests under lubrication conditions |
Testing Principle
This tester simulates different friction types (point, line, and surface contact) under controlled loads, frequencies, and temperatures. You can automatically control the test process while monitoring and recording friction force, coefficient of friction, and temperature in real time. The collected data allows you to analyze the tribological behavior of materials or coatings under various operating conditions.
Operation Instructions
Installation & Inspection: Ensure the tester is securely installed, power supply and control system are functioning correctly.
Sample Preparation: Select and install appropriate friction pair materials and securely fix your samples.
Parameter Setting: Use the touchscreen or computer to set load, friction pair type, test frequency, stroke, and temperature.
Start Testing: Confirm all settings and start the experiment while monitoring parameters.
Data Analysis: After testing, analyze the results with software and generate reports.
Experimental Procedure
Select Friction Pair: Choose the friction pair configuration that meets your test requirements (pin-on-disk, ball-on-disk, etc.).
Install Samples: Mount your samples securely, ensuring proper contact with the friction pair.
Set Test Parameters: Configure load, frequency, stroke, and temperature according to the test plan.
Run Test: Start the test and monitor all key parameters in real time.
Complete & Analyze: After testing, save the data, analyze the results with software, and evaluate material friction and wear performance.
Send product request
Other supplier products
 |
Leather Water Vapor Permeability Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Leather Water Vapor Permeability Tester measures the ability of leather and leather-lik... |
 |
Battery Cell Short Circuit Failure Tester UL Standard Certified | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) IEC 62133-2012 – Safety Requirements for Portable Second... |
 |
Scratch tester STD-KK01 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product introduction: With the continuous expansion of the use of plastic molding products... |
 |
Temperature-Humidity-Vibration Combined Test System,Temperature Humidity Combined Vibration Test System | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Temperature-Humidity-Vibration Combined Test Systemis an advanced reliability testing p... |
 |
Molten Metal Splash Impact Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Projections of molten metal drops at a point on a vertical oriented test specimen and measu... |
Same products
 |
ER4047 Aluminum Mig Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | Seller: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
