Precision Reciprocating Friction and Wear Tester Type 02
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
ASTM G99 – Standard Test Method for Wear Testing
ASTM G133 – High-Temperature Friction and Wear Test Method
ISO 20808 – Solid Material Friction and Wear Test
GB/T 3147 – Determination of Friction Material Wear Performance
Technical Specifications
| Parameter | Specification |
|---|---|
| Maximum Reciprocating Frequency | 20 Hz (continuously adjustable), 30 Hz (optional) |
| Maximum Stroke | 40 mm |
| Maximum Friction Force | 100 N |
| Maximum Load | 200 N |
| Friction Pair Types | Pin-on-disk, Ball-on-disk, Cylinder-on-block |
| Test Duration Control | 1 s – 9999 h |
| Lifting Height | 25 mm |
| High-Temperature Module (Optional) | Room temperature – 600℃ |
Features
High-Frequency Testing: Reciprocating frequency up to 20 Hz, supporting high-speed wear experiments
Large Stroke Range: Maximum stroke 40 mm, suitable for various friction pairs and test conditions
High-Precision Measurement: Friction force up to 100 N, load up to 200 N, ensuring accurate testing
Multiple Friction Pairs: Supports pin-on-disk, ball-on-disk, cylinder-on-block configurations
Temperature Control: Optional high-temperature module allows testing up to 600℃
Full Automation: Controlled via industrial computer and software, with automated data recording and report generation
Safety Features: Equipped with overload shutdown and alarm functions to protect you and the equipment
Accessories
| Name | Description |
|---|---|
| High-Temperature Module | For tests up to 600℃ |
| Friction Pair Materials | Pin-on-disk, ball-on-disk, cylinder-on-block, etc. |
| Temperature Sensors | Monitor temperature during high-temperature testing |
| Lubricants | For friction tests under lubrication conditions |
Testing Principle
This tester simulates different friction types (point, line, and surface contact) under controlled loads, frequencies, and temperatures. You can automatically control the test process while monitoring and recording friction force, coefficient of friction, and temperature in real time. The collected data allows you to analyze the tribological behavior of materials or coatings under various operating conditions.
Operation Instructions
Installation & Inspection: Ensure the tester is securely installed, power supply and control system are functioning correctly.
Sample Preparation: Select and install appropriate friction pair materials and securely fix your samples.
Parameter Setting: Use the touchscreen or computer to set load, friction pair type, test frequency, stroke, and temperature.
Start Testing: Confirm all settings and start the experiment while monitoring parameters.
Data Analysis: After testing, analyze the results with software and generate reports.
Experimental Procedure
Select Friction Pair: Choose the friction pair configuration that meets your test requirements (pin-on-disk, ball-on-disk, etc.).
Install Samples: Mount your samples securely, ensuring proper contact with the friction pair.
Set Test Parameters: Configure load, frequency, stroke, and temperature according to the test plan.
Run Test: Start the test and monitor all key parameters in real time.
Complete & Analyze: After testing, save the data, analyze the results with software, and evaluate material friction and wear performance.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
ISO 14704 Hosiery Stretch Testing Machine Factory | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Features Ergonomic design: Control panel located at ~100 cm height f... |
 |
Syringe slide performance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This tester is suitable for evaluating the sliding performance of various medic... |
 |
Dry Sand Rubber Wheel Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machi... |
 |
Smoldering performance test furnace of thermal insulation material | Whats/App: +86 156 1874 6768 Web: standard-groups.com Thermal insulation material smoldering test furnace is a performance test device, using int... |
 |
Horizontal Vertical Flame Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction UL94 Horizontal Vertical Flame Testeris designed to simulate the early firing... |
Похожие товары
 |
China factory electrode TGYS125 for power station Selection of advanced | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory electrode TGYS125 for power station Selection of advanced technology, absolutely f... |
 |
Laser Chuck | Продавец: 00000 | Laser Chuck Introduce foreign advanced technology and management concept, High precision pro... |
 |
Power Pallet Jack For Sale | Продавец: Jinan Hulk Machinery Co., Ltd | Power Pallet Jack For Sale Electric Pallet Truck For Sale As a supplier of power pallet jac... |
 |
Multi Directional Forklift For Sale | Продавец: Jinan Hulk Machinery Co., Ltd | Multi Directional Forklift For Sale Multi Directional Forklift For Sale As a supplier of mu... |
 |
Narrow Aisle Forklift For Sale | Продавец: Jinan Hulk Machinery Co., Ltd | Narrow Aisle Forklift For Sale Narrow Aisle Forklift For Sale As a supplier of , we provide... |
