Industrial Linear Reciprocating Friction and Wear Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
GB/T 3960-2016 Plastics – Determination of Sliding Wear Properties
GB/T 12444 Metallic Materials – General Friction and Wear Testing Methods
ASTM G133 Linear Reciprocating Sliding Wear Test
ASTM G99 Pin-on-Disk Wear Test (related friction measurement requirements)
ISO 7148 Sliding Friction and Wear Testing (relevant sections)
DIN 50324 General Principles of Friction and Wear Testing
Parameters
| Parameter | Specification |
|---|---|
| Test Load Range | 30–1000 g (weight loading) |
| Automatic Loading Range | 10–200 N |
| Test Load Measurement Accuracy | 0.2% F.S |
| Reciprocating Stroke | 0.5–50 mm (adjustable) |
| Reciprocating Frequency | 2–30 Hz |
| Sliding Speed | 0.1–20 mm/s |
| Heating Furnace Temperature | Room temperature – 300℃ |
| Furnace Sample Size | Φ15–40 mm |
| Load Range in Heated State | 0.3–80 N |
| Friction Force Measurement Range | ≤100 N |
| Wear Load Range | ≤40 g |
| Wear Depth Measurement Range | ±0.5 mm |
| Wear Depth Measurement Accuracy | 0.02 µm |
| Control Method | Computer automatic control |
| Data Processing | Real-time curve display and data storage |
Features
Linear constant-speed reciprocating motion ensures stable, repeatable friction conditions.
Wide load range supports both weight and automatic loading.
Independently adjustable sliding speed and stroke to simulate various working conditions.
Supports high-temperature testing for realistic service environment simulation.
Integrated online wear depth measurement allows quantitative wear analysis.
Computer-controlled data acquisition ensures synchronized friction coefficient and wear measurement.
Long-term stable operation suitable for research and industrial testing.
Accessories
| Accessory | Specification / Use |
|---|---|
| Reciprocating Drive Unit | Standard, achieves constant-speed reciprocating motion |
| Friction Fixture | Multiple specifications, for different samples |
| Weight Set | 30–1000 g, manual load application |
| Automatic Loading Module | 10–200 N, stable load control |
| High-Temperature Furnace | Room temperature – 300℃, high-temperature friction testing |
| Wear Measurement Probe | Standard, measures wear volume |
| Control and Analysis Software | Standard, data acquisition and analysis |
Test Principle
During testing, the drive system moves the specimen in a linear constant-speed reciprocating motion under a set load, creating a stable and controlled friction interface. Friction sensors collect real-time friction force signals and calculate the friction coefficient. The wear measurement system accurately records wear depth and width to determine wear volume. By comparing friction and wear parameters under different materials or test conditions, the tester provides quantitative evaluation of material wear resistance.
Operation Instructions
Ensure specimens are clean, flat, and correctly installed.
Select appropriate loading method and test parameters according to standards.
For high-temperature tests, confirm the furnace and temperature control system are functioning properly.
Do not touch moving parts or high-temperature areas during testing.
Stop the machine immediately if abnormal friction force or noise occurs.
Save data after testing and clean the friction fixture.
Experimental Flow
Prepare specimens and measure initial dimensions according to standards.
Install specimens and friction fixtures, set load, stroke, speed, and temperature.
Start the test; the system performs linear constant-speed reciprocating friction automatically.
Acquire friction coefficient and wear data in real-time and generate curves.
Measure wear morphology and wear volume after the test.
Compile test data and generate a complete test report.
Send product request
Other supplier products
 |
UV Accelerated Weathering Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard： ASTM D4329、ASTM D4587、ASTM D4799 、ASTM D5208、ASTM G151、ASTM G154 、EN 927-6、EN 12... |
 |
Cookware scratch resistance testing machine for non-stick coating | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) BS7069 Annex A.3 – Scratch resistance test method for non-stick cookwa... |
 |
fingertip hand abrasion tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Functionality of a product is considered as a matter of course, so the perception of qualit... |
 |
Plastic Smoke Density Tester F313 | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific optical density of smoke generated during the comb... |
 |
Dry Sand Rubber Wheel Wear Tester | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of materials. Its working principle is to use a clockwise ... |
Same products
 |
Heat Flow Method for Thermal Conductivity Measurement | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument complies with a... |
 |
Benchtop Thermal Conductivity Tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument is designed and... |
 |
Guarded Heat Flow Measurement System | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM E1530: Standard Test Meth... |
 |
ASTM C518 High-Precision Heat Flow Measurement System | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM C518: Standard Test Metho... |
 |
Laboratory Hot-Wire Thermal Conductivity Tester for Liquids | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The analyzer is designed and t... |
