Industrial Linear Reciprocating Friction and Wear Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
GB/T 3960-2016 Plastics – Determination of Sliding Wear Properties
GB/T 12444 Metallic Materials – General Friction and Wear Testing Methods
ASTM G133 Linear Reciprocating Sliding Wear Test
ASTM G99 Pin-on-Disk Wear Test (related friction measurement requirements)
ISO 7148 Sliding Friction and Wear Testing (relevant sections)
DIN 50324 General Principles of Friction and Wear Testing
Parameters
| Parameter | Specification |
|---|---|
| Test Load Range | 30–1000 g (weight loading) |
| Automatic Loading Range | 10–200 N |
| Test Load Measurement Accuracy | 0.2% F.S |
| Reciprocating Stroke | 0.5–50 mm (adjustable) |
| Reciprocating Frequency | 2–30 Hz |
| Sliding Speed | 0.1–20 mm/s |
| Heating Furnace Temperature | Room temperature – 300℃ |
| Furnace Sample Size | Φ15–40 mm |
| Load Range in Heated State | 0.3–80 N |
| Friction Force Measurement Range | ≤100 N |
| Wear Load Range | ≤40 g |
| Wear Depth Measurement Range | ±0.5 mm |
| Wear Depth Measurement Accuracy | 0.02 µm |
| Control Method | Computer automatic control |
| Data Processing | Real-time curve display and data storage |
Features
Linear constant-speed reciprocating motion ensures stable, repeatable friction conditions.
Wide load range supports both weight and automatic loading.
Independently adjustable sliding speed and stroke to simulate various working conditions.
Supports high-temperature testing for realistic service environment simulation.
Integrated online wear depth measurement allows quantitative wear analysis.
Computer-controlled data acquisition ensures synchronized friction coefficient and wear measurement.
Long-term stable operation suitable for research and industrial testing.
Accessories
| Accessory | Specification / Use |
|---|---|
| Reciprocating Drive Unit | Standard, achieves constant-speed reciprocating motion |
| Friction Fixture | Multiple specifications, for different samples |
| Weight Set | 30–1000 g, manual load application |
| Automatic Loading Module | 10–200 N, stable load control |
| High-Temperature Furnace | Room temperature – 300℃, high-temperature friction testing |
| Wear Measurement Probe | Standard, measures wear volume |
| Control and Analysis Software | Standard, data acquisition and analysis |
Test Principle
During testing, the drive system moves the specimen in a linear constant-speed reciprocating motion under a set load, creating a stable and controlled friction interface. Friction sensors collect real-time friction force signals and calculate the friction coefficient. The wear measurement system accurately records wear depth and width to determine wear volume. By comparing friction and wear parameters under different materials or test conditions, the tester provides quantitative evaluation of material wear resistance.
Operation Instructions
Ensure specimens are clean, flat, and correctly installed.
Select appropriate loading method and test parameters according to standards.
For high-temperature tests, confirm the furnace and temperature control system are functioning properly.
Do not touch moving parts or high-temperature areas during testing.
Stop the machine immediately if abnormal friction force or noise occurs.
Save data after testing and clean the friction fixture.
Experimental Flow
Prepare specimens and measure initial dimensions according to standards.
Install specimens and friction fixtures, set load, stroke, speed, and temperature.
Start the test; the system performs linear constant-speed reciprocating friction automatically.
Acquire friction coefficient and wear data in real-time and generate curves.
Measure wear morphology and wear volume after the test.
Compile test data and generate a complete test report.
在线联系供应商
Other supplier products
 |
Wire Harness Connector Air Tightness Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com TheAir-Tightness Testing Device for Automotive Connectorsis designed to perfo... |
 |
Particle Impact Wear Testing Machine ASTM International | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) GB 3636-83 — Method for determination of wear rate of ca... |
 |
Fire Retardant Coating Tester – Large Plate Method | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Fire Retardant Coating Tester (Large Plate Method) is designed to evaluate the fire res... |
 |
ASTM G99 Precision Rotary Vacuum Tribometer Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Precision Rotary Vacuum Tribometer is a laboratory-grade tribological testing... |
 |
Soiling and Abrasion in Photovoltaics Test System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard VDI 3956-1 Technical data ParameterUnitValue Air flow velocity m/s ... |
Same products
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
