Rotary Tribometer ASTM D2266 DIN 50324 ISO 11008

Get a quote：

Whats/App: +86 185 0176 3615

Web: qinsun-lab.com

The Rotary Tribometer is a multifunctional friction and wear testing instrument designed for comprehensive tribological research. You use this system to study friction behavior, wear mechanisms, and lubrication performance under controlled rotational motion. By combining axial loading, precise load control, and an open test platform, the Rotary Tribometer allows you to simulate a wide range of real operating conditions, including dry friction, lubricated friction, high-speed rotation, and high-temperature environments. It provides accurate measurement of friction coefficient, wear behavior, temperature, vibration, and electrical contact resistance for material and lubricant evaluation.

Application

You can apply the Rotary Tribometer in laboratory research, quality evaluation, and component performance testing across multiple industries, including:

Lubricant anti-wear, extreme-pressure, and friction performance evaluation

(four-ball tests, thrust washer tests)

Material friction and wear research

(pin-on-disk, thrust pad, bearing materials, rolling contact fatigue)

Performance evaluation of hydraulic and lubrication system components

(pump vanes, slipper pads, seals)

Friction, wear, and lifetime analysis of bearings, gears, and rotating components

High-temperature dry friction and lubricated friction testing

(with test temperatures up to 600 °C using high-temperature fixtures)

Tribocorrosion and electrochemical wear studies

(lip seals and three-electrode systems)

Small-sample friction testing

(LVFA, Suzuki-type tests, miniature thrust pads)

Rolling contact fatigue and tilting bearing performance evaluation

Standards

You can conduct tests in accordance with widely recognized international and regional standards, including:

(1) GB/T 3140 series – Wear performance testing of lubricating oils and greases

(2) ASTM D2266 – Anti-wear properties of lubricating grease (four-ball method)

(3) ASTM D2783 – Extreme pressure properties of lubricating fluids

(4) ASTM D3702 – Thrust washer wear testing

(5) ASTM D4172 – Anti-wear properties of lubricating oils

(6) ASTM D5183 – Determination of friction coefficient of lubricants

(7) ASTM G99 – Pin-on-disk wear testing

(8) DIN 50324 – Determination of friction and wear of solid materials

(9) DIN 51350 (Parts 1–6) – Lubricant shear stability and wear testing

(10) ISO 11008 – Extreme pressure properties of lubricating greases (four-ball method)

(11) IP 239 / IP 300 – Lubricant extreme pressure and wear tests

(12) CEC L-45-T-93 – Shear stability of transmission fluids

Parameters

Item	Standard Configuration	High-Speed Configuration	Upgraded Configuration
Speed Range	30–3,000 rpm	30–3,000 rpm / 100–10,000 rpm	Same as high-speed
Maximum Spindle Load	10,000 N @ 3,000 rpm	10,000 N @ 3,000 rpm / 4,000 N @ 10,000 rpm	Same as high-speed
Maximum Spindle Speed	6,000 rpm	10,000 rpm	10,000 rpm
Torque Capacity	14 Nm @ 30–1,500 rpm	14 Nm @ 30–1,500 rpm / 7 Nm @ 3,000 rpm / 2.1 Nm @ 10,000 rpm	25 Nm @ 30–1,500 rpm / 13 Nm @ 3,000 rpm / 4 Nm @ 10,000 rpm
Motor Power	2.2 kW, single-phase	2.2 kW, single-phase	4 kW, three-phase
Temperature Capability	Up to 600 °C (with high-temperature fixture)	Up to 600 °C (with high-temperature fixture)	Up to 600 °C (with high-temperature fixture)
Load Range	1–10,000 N (depending on actuator)	1–10,000 N (depending on actuator)	1–10,000 N (depending on actuator)
Control Parameters	Speed, load, temperature, test time	Speed, load, temperature, test time	Speed, load, temperature, test time
Recorded Parameters	Speed, friction torque, friction coefficient, contact resistance, temperature, sliding distance, cycle count	Same as standard	Same as standard
Data Interface	USB / software	USB / software	USB / software
Air Supply	≥ 4 cfm @ 8 bar	≥ 4 cfm @ 8 bar	≥ 4 cfm @ 8 bar
Dimensions	900 × 600 × 2,000 mm	900 × 600 × 2,000 mm	900 × 600 × 2,000 mm
Weight	350 kg	350 kg	350 kg

Other supplier products

	Cigarette paper smoldering performance tester | ASTM ISO Testing Machine	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com This instrument is used to measure the smoldering performance of cigarette paper. ...
	General Ventilation Test Bench	The General Ventilation Test Bench is designed to evaluate the performance of general ventilation air filters. Based on ISO 16890-2016, the system ...
	IULTCS/Veslic Rub Fastness Tester | ASTM ISO Testing Machine	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Standards IS0 11640 Leather-Tests for colour fastness-colour fastness to cycles o...
	Stoll Quartermaster	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Standards: ASTM D3514/D3885/D3886, AATCC 119/120, FTMS 191/5300/5302, FORD EFB 15...
	Single Station Jounce Tester - lab instrument	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com We are a professional testing instrument manufactur...

All supplier products

Same products

	HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line	Seller: Shandong HUASU Plastic Technology Co.,Ltd.	The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi...
	PanEVAP & MVR system	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...