Rotary Tribometer ASTM D2266 DIN 50324 ISO 11008
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The Rotary Tribometer is a multifunctional friction and wear testing instrument designed for comprehensive tribological research. You use this system to study friction behavior, wear mechanisms, and lubrication performance under controlled rotational motion. By combining axial loading, precise load control, and an open test platform, the Rotary Tribometer allows you to simulate a wide range of real operating conditions, including dry friction, lubricated friction, high-speed rotation, and high-temperature environments. It provides accurate measurement of friction coefficient, wear behavior, temperature, vibration, and electrical contact resistance for material and lubricant evaluation.
Application
You can apply the Rotary Tribometer in laboratory research, quality evaluation, and component performance testing across multiple industries, including:
Lubricant anti-wear, extreme-pressure, and friction performance evaluation
(four-ball tests, thrust washer tests)
Material friction and wear research
(pin-on-disk, thrust pad, bearing materials, rolling contact fatigue)
Performance evaluation of hydraulic and lubrication system components
(pump vanes, slipper pads, seals)
Friction, wear, and lifetime analysis of bearings, gears, and rotating components
High-temperature dry friction and lubricated friction testing
(with test temperatures up to 600 °C using high-temperature fixtures)
Tribocorrosion and electrochemical wear studies
(lip seals and three-electrode systems)
Small-sample friction testing
(LVFA, Suzuki-type tests, miniature thrust pads)
Rolling contact fatigue and tilting bearing performance evaluation
Standards
You can conduct tests in accordance with widely recognized international and regional standards, including:
(1) GB/T 3140 series – Wear performance testing of lubricating oils and greases
(2) ASTM D2266 – Anti-wear properties of lubricating grease (four-ball method)
(3) ASTM D2783 – Extreme pressure properties of lubricating fluids
(4) ASTM D3702 – Thrust washer wear testing
(5) ASTM D4172 – Anti-wear properties of lubricating oils
(6) ASTM D5183 – Determination of friction coefficient of lubricants
(7) ASTM G99 – Pin-on-disk wear testing
(8) DIN 50324 – Determination of friction and wear of solid materials
(9) DIN 51350 (Parts 1–6) – Lubricant shear stability and wear testing
(10) ISO 11008 – Extreme pressure properties of lubricating greases (four-ball method)
(11) IP 239 / IP 300 – Lubricant extreme pressure and wear tests
(12) CEC L-45-T-93 – Shear stability of transmission fluids
Parameters
| Item | Standard Configuration | High-Speed Configuration | Upgraded Configuration |
|---|---|---|---|
| Speed Range | 30–3,000 rpm | 30–3,000 rpm / 100–10,000 rpm | Same as high-speed |
| Maximum Spindle Load | 10,000 N @ 3,000 rpm | 10,000 N @ 3,000 rpm / 4,000 N @ 10,000 rpm | Same as high-speed |
| Maximum Spindle Speed | 6,000 rpm | 10,000 rpm | 10,000 rpm |
| Torque Capacity | 14 Nm @ 30–1,500 rpm | 14 Nm @ 30–1,500 rpm / 7 Nm @ 3,000 rpm / 2.1 Nm @ 10,000 rpm | 25 Nm @ 30–1,500 rpm / 13 Nm @ 3,000 rpm / 4 Nm @ 10,000 rpm |
| Motor Power | 2.2 kW, single-phase | 2.2 kW, single-phase | 4 kW, three-phase |
| Temperature Capability | Up to 600 °C (with high-temperature fixture) | Up to 600 °C (with high-temperature fixture) | Up to 600 °C (with high-temperature fixture) |
| Load Range | 1–10,000 N (depending on actuator) | 1–10,000 N (depending on actuator) | 1–10,000 N (depending on actuator) |
| Control Parameters | Speed, load, temperature, test time | Speed, load, temperature, test time | Speed, load, temperature, test time |
| Recorded Parameters | Speed, friction torque, friction coefficient, contact resistance, temperature, sliding distance, cycle count | Same as standard | Same as standard |
| Data Interface | USB / software | USB / software | USB / software |
| Air Supply | ≥ 4 cfm @ 8 bar | ≥ 4 cfm @ 8 bar | ≥ 4 cfm @ 8 bar |
| Dimensions | 900 × 600 × 2,000 mm | 900 × 600 × 2,000 mm | 900 × 600 × 2,000 mm |
| Weight | 350 kg | 350 kg | 350 kg |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Oil Filter Performance Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Applications include hydraulic filter testing, fastener fatigue testing, shoe bend... |
 |
OSU Rate of Heat Release Apparatus | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The OSU Rate of Heat Release Apparatus is widely used in the following areas: Aer... |
 |
Fabric Touch Tester - Test Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Brief Introduction：By softness value of the test material and objective evaluation... |
 |
Automotive Seat Dynamic Comfort Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com 1. Product Overview The Automotive Seat Dynamic Co... |
 |
Cone Calorimeter / Cone calorimetric test equipment | ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Cone Calorimeter is widely used to evaluate fire performance of materials and ... |
