Damp heat test chamber for solar panels IEC standard
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Photovoltaic Module Damp Heat Test Chamber is designed to simulate long-term tropical aging conditions for photovoltaic modules and related electronics. By combining high temperature and high humidity control, the system enables accelerated evaluation of module reliability, encapsulant degradation, and potential PID (Potential Induced Degradation) effects. It is suitable for R&D laboratories, quality assurance, and certification testing in compliance with international standards.
Application
Accelerated aging tests of photovoltaic modules under high temperature and humidity.
Evaluation of PID resistance and encapsulant performance.
Reliability testing of batteries, PV modules, and electronic assemblies in wet and humid conditions.
Indoor certification and R&D testing for IEC/UL compliance.
Standards
(1)IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
(2)UL 1073: Standard for Safety for Enclosures for Electrical Equipment
(3)ISO 16750-4: Road Vehicles – Environmental Conditions and Testing for Electrical and Electronic Equipment
(4)CE Certification (Conformité Européenne)
Features
(1)Extreme Environmental Simulation: 85°C ±2°C / 85% RH control replicates 10+ years of tropical aging in 1.000 hours.
(2)Ultra-Stable Performance: ±1°C temperature stability and ≤2°C uniformity for consistent long-term testing.
(3)Energy Efficiency: Advanced insulation and heat recovery reduce power consumption by 40%; ECO mode for auto power-down during stabilization.
(4)Safety First: Dual overload protection with thermal cutout and door interlock system.
(5)Smart Diagnostics: AI-powered degradation prediction using IV curve shifts and EL imaging data; remote monitoring via 4G/LTE.
(6)Flexible Operation: Dual-chamber design enables simultaneous wet/dry testing; modular expansion up to 1.500 L for full-size PV arrays.
(7)User-Friendly Interface: 10” touchscreen HMI with preloaded IEC/UL test profiles and automated condensation drainage.
(8)Glovebox Compatibility: Oxygen/moisture controlled operation for sensitive electronics.
Parameters
| Parameter | Specification |
|---|---|
| Temperature Range | 30°C to 85°C (operational) |
| Temperature Stability | ±1°C (at 85°C setpoint) |
| Temperature Uniformity | ≤±2°C (empty chamber) |
| Humidity Range | 30%–95% RH (non-condensing) |
| Humidity Stability | ±2.5% RH (at 85% RH) |
| Chamber Volume | 500 L (standard), expandable to 1.500 L |
| Power Supply | 380V/415V, 3-phase, 50/60Hz |
| Dimensions (W×D×H) | 1.200 mm × 1.800 mm × 2.000 mm |
| Weight | 800 kg (net) / 1.200 kg (gross) |
Send product request
Other supplier products
 |
Strength Tester for Lead - end of Photovoltaic Modules | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard IEC 61215-2:2016: Terrestrial Photovoltaic (PV) Modules – Test Requiremen... |
 |
Air flow drying rate test equipment supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Airflow Method Fabric Drying Rate Tester is an automated precision instru... |
 |
Conveyor Belt Drum Friction Testing Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum fricti... |
 |
Nanofiber Electrospinning Device，nanofiber electrospinning equipment NEU | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Nanofiber Electrospinning Device is designed to fabricate nanofibers with diameters ran... |
 |
Cookware Abrasion Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Primary applications Scratch and wear resistance testing for non-stick cookwa... |
Same products
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
