.

Damp heat test chamber for solar panels IEC standard

Whats/App: +86 156 1874 6768

Web: standard-groups.com

The Photovoltaic Module Damp Heat Test Chamber is designed to simulate long-term tropical aging conditions for photovoltaic modules and related electronics. By combining high temperature and high humidity control, the system enables accelerated evaluation of module reliability, encapsulant degradation, and potential PID (Potential Induced Degradation) effects. It is suitable for R&D laboratories, quality assurance, and certification testing in compliance with international standards.

Application

Accelerated aging tests of photovoltaic modules under high temperature and humidity.

Evaluation of PID resistance and encapsulant performance.

Reliability testing of batteries, PV modules, and electronic assemblies in wet and humid conditions.

Indoor certification and R&D testing for IEC/UL compliance.

Standards

(1)IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

(2)UL 1073: Standard for Safety for Enclosures for Electrical Equipment

(3)ISO 16750-4: Road Vehicles – Environmental Conditions and Testing for Electrical and Electronic Equipment

(4)CE Certification (Conformité Européenne)

Features

(1)Extreme Environmental Simulation: 85°C ±2°C / 85% RH control replicates 10+ years of tropical aging in 1.000 hours.

(2)Ultra-Stable Performance: ±1°C temperature stability and ≤2°C uniformity for consistent long-term testing.

(3)Energy Efficiency: Advanced insulation and heat recovery reduce power consumption by 40%; ECO mode for auto power-down during stabilization.

(4)Safety First: Dual overload protection with thermal cutout and door interlock system.

(5)Smart Diagnostics: AI-powered degradation prediction using IV curve shifts and EL imaging data; remote monitoring via 4G/LTE.

(6)Flexible Operation: Dual-chamber design enables simultaneous wet/dry testing; modular expansion up to 1.500 L for full-size PV arrays.

(7)User-Friendly Interface: 10” touchscreen HMI with preloaded IEC/UL test profiles and automated condensation drainage.

(8)Glovebox Compatibility: Oxygen/moisture controlled operation for sensitive electronics.

Parameters

ParameterSpecification
Temperature Range 30°C to 85°C (operational)
Temperature Stability ±1°C (at 85°C setpoint)
Temperature Uniformity ≤±2°C (empty chamber)
Humidity Range 30%–95% RH (non-condensing)
Humidity Stability ±2.5% RH (at 85% RH)
Chamber Volume 500 L (standard), expandable to 1.500 L
Power Supply 380V/415V, 3-phase, 50/60Hz
Dimensions (W×D×H) 1.200 mm × 1.800 mm × 2.000 mm
Weight 800 kg (net) / 1.200 kg (gross)

在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

ISO Digital flame resistance testing machine
ISO Digital flame resistance testing machine Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com Flame Spread Test Apparatus is designed to evaluate the combustion behavior o...
Contact heat resistance tester
Contact heat resistance tester Whats/App: +86 156 1874 6768 Web: standard-groups.com The contact heat resistance tester evaluates materials' ability to withstand high-temperatu...
Walk-in high low temperature low pressure test chamber IEC 60068 certified
Walk-in high low temperature low pressure test chamber IEC 60068 certified Get a quote: Whats/App: +86 156 1874 6768 Web: standard-groups.com TheWalk-in High/Low Temperature and Low Pressure Test Chamberis a precision e...
Automotive Wire Cut-Through Tester
Automotive Wire Cut-Through Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Wire Cut-Through Tester is designed to evaluate the resistance of automotive...
Solid Auto - ignition Point Tester
Solid Auto - ignition Point Tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction This tester determines the self - ignition characteristics of solid c...
供应产品

Same products

China factory electrode TGYS125 for power station Selection of advanced
China factory electrode TGYS125 for power station Selection of advanced 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China factory electrode TGYS125 for power station Selection of advanced technology, absolutely f...
Laser Chuck
Laser Chuck 卖方: 00000 Laser Chuck Introduce foreign advanced technology and management concept, High precision pro...
Power Pallet Jack For Sale
Power Pallet Jack For Sale 卖方: Jinan Hulk Machinery Co., Ltd Power Pallet Jack For Sale Electric Pallet Truck For Sale As a supplier of power pallet jac...
Multi Directional Forklift For Sale
Multi Directional Forklift For Sale 卖方: Jinan Hulk Machinery Co., Ltd Multi Directional Forklift For Sale Multi Directional Forklift For Sale As a supplier of mu...
Narrow Aisle Forklift For Sale
Narrow Aisle Forklift For Sale 卖方: Jinan Hulk Machinery Co., Ltd Narrow Aisle Forklift For Sale Narrow Aisle Forklift For Sale As a supplier of , we provide...