Seat Belt Test Dummy
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Crash Test Dummy for Seatbelt Testing is a high-precision anthropomorphic test device designed specifically for dynamic evaluation and development of automotive seatbelt systems. It represents a 50th percentile adult male, with physical mass distribution and body dimensions accurately modeled. Constructed from metal, fiberglass, and polyurethane materials, it realistically simulates the skeletal and muscular responses of the human body under dynamic seatbelt loading conditions.
Application
You can use this dummy for:
(1) Dynamic performance verification of automotive seatbelt systems;
(2) Development, optimization, and validation of vehicle seats and occupant restraint systems;
(3) Frontal and oblique collision simulation experiments;
(4) Seatbelt design evaluation and occupant injury assessment;
(5) Regulatory compliance testing according to national and international standards.
Standards
This dummy complies with the following standards:
(1) GB 14166-2013 Motor Vehicle Occupant Restraint System Crash Test Dummy;
(2) ECE R16 Uniform Provisions for Vehicle Seatbelt and Restraint System Certification;
(3) ISO 15830 Road Vehicles – Side Impact Dummy for Restraint System Evaluation.
Parameters
Dimensional Parameters
| No. | Measurement Parameter | Dimension (mm) |
|---|---|---|
| 1 | Head Width | 160 ± 5 |
| 2 | Shoulder Width | 465 ± 5 |
| 3 | Hip Position Torso Width | 120 ± 5 |
| 4 | Hip Width | 340 ± 5 |
| 5 | Knee Center to Floor | 510 ± 10 |
| 6 | Hip Center to Floor | 990 ± 10 |
| 7 | Torso Upper Plane to Floor | 1470 ± 10 |
| 8 | Head Bolt Center to Floor | 1600 ± 10 |
| 9 | Head Top to Floor | 1750 ± 10 |
| 10 | T-Point Height | 720 ± 5 |
| 11 | P-Point Height | 320 ± 5 |
Mass Distribution
| No. | Component | Mass (kg) |
|---|---|---|
| 1 | Head Assembly | 4.0 ± 0.2 |
| 2 | Neck Assembly | 0.7 ± 0.1 |
| 3 | Torso Assembly | 29.7 ± 1.0 |
| 4 | Thigh Assembly (L/R) | 12.3 ± 0.3 |
| 5 | Lower Leg Assembly | 8.4 ± 0.3 |
| 6 | Hip Joint | 3.1 ± 0.1 |
| 7 | Knee Joint Assembly | 1.1 ± 0.1 |
| 8 | Outer Jacket + Chest Pad | 1.1 ± 0.1 |
| 9 | Total Mass (including calibration) | 75.5 ± 1.0 |
Sensor Configuration
| Installation Location | Sensor Type | Channels |
|---|---|---|
| Head | Accelerometer | 3 |
| Chest | Cable Displacement Sensor | 1 |
| Pelvis | Cable Displacement Sensor | 2 |
Send product request
Other supplier products
 |
Solids Spontaneously Igniting Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description Conforms to the UN Recommendations on the Transport of Dangerous Goods... |
 |
Taber 5900 Abrasion Tester for Coatings and Materials | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Fixed sample on a horizontal table, wearing it under the specified abrasive a... |
 |
Helmets Designated Protection Areas Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Main Purposes 1. Used to mark test points and test lines on helmets. 2. Used for line - m... |
 |
Rubber Mooney Viscosity Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Rubber Mooney Viscosity Tester measures the viscosity of rubber under controlled temper... |
 |
G631A electric shoe stripping testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: Upper peeling strength tester is suitable for testing the peeling st... |
Same products
 |
Laser Cutting Machines | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Seller: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
