Seat Belt Test Dummy
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Crash Test Dummy for Seatbelt Testing is a high-precision anthropomorphic test device designed specifically for dynamic evaluation and development of automotive seatbelt systems. It represents a 50th percentile adult male, with physical mass distribution and body dimensions accurately modeled. Constructed from metal, fiberglass, and polyurethane materials, it realistically simulates the skeletal and muscular responses of the human body under dynamic seatbelt loading conditions.
Application
You can use this dummy for:
(1) Dynamic performance verification of automotive seatbelt systems;
(2) Development, optimization, and validation of vehicle seats and occupant restraint systems;
(3) Frontal and oblique collision simulation experiments;
(4) Seatbelt design evaluation and occupant injury assessment;
(5) Regulatory compliance testing according to national and international standards.
Standards
This dummy complies with the following standards:
(1) GB 14166-2013 Motor Vehicle Occupant Restraint System Crash Test Dummy;
(2) ECE R16 Uniform Provisions for Vehicle Seatbelt and Restraint System Certification;
(3) ISO 15830 Road Vehicles – Side Impact Dummy for Restraint System Evaluation.
Parameters
Dimensional Parameters
| No. | Measurement Parameter | Dimension (mm) |
|---|---|---|
| 1 | Head Width | 160 ± 5 |
| 2 | Shoulder Width | 465 ± 5 |
| 3 | Hip Position Torso Width | 120 ± 5 |
| 4 | Hip Width | 340 ± 5 |
| 5 | Knee Center to Floor | 510 ± 10 |
| 6 | Hip Center to Floor | 990 ± 10 |
| 7 | Torso Upper Plane to Floor | 1470 ± 10 |
| 8 | Head Bolt Center to Floor | 1600 ± 10 |
| 9 | Head Top to Floor | 1750 ± 10 |
| 10 | T-Point Height | 720 ± 5 |
| 11 | P-Point Height | 320 ± 5 |
Mass Distribution
| No. | Component | Mass (kg) |
|---|---|---|
| 1 | Head Assembly | 4.0 ± 0.2 |
| 2 | Neck Assembly | 0.7 ± 0.1 |
| 3 | Torso Assembly | 29.7 ± 1.0 |
| 4 | Thigh Assembly (L/R) | 12.3 ± 0.3 |
| 5 | Lower Leg Assembly | 8.4 ± 0.3 |
| 6 | Hip Joint | 3.1 ± 0.1 |
| 7 | Knee Joint Assembly | 1.1 ± 0.1 |
| 8 | Outer Jacket + Chest Pad | 1.1 ± 0.1 |
| 9 | Total Mass (including calibration) | 75.5 ± 1.0 |
Sensor Configuration
| Installation Location | Sensor Type | Channels |
|---|---|---|
| Head | Accelerometer | 3 |
| Chest | Cable Displacement Sensor | 1 |
| Pelvis | Cable Displacement Sensor | 2 |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Cleanliness Analysis System | Whats/App: +86 156 1874 6768 Web: standard-groups.com The cleanliness analysis system fully complies with the requirements of standards such as V... |
 |
AATCC 61 Washing Fastness Tester | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com G228B washing fastness tester is used for washing, dry-clean color fastness t... |
 |
Air Intake Filter Test System，ISO 5011 Air Intake Filter Performance Test System | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Air Intake Filter Test System is designed for testing industrial air filters and engine... |
 |
Standard Helmet Visual Field Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Standard Helmet Visual Field Tester is a precision instrument designed to evaluate the ... |
 |
High Temperature Voltage Breakdown (Air Heating) Tester，air breakdown tester for industrial testing | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Computer-Controlled Dielectric Breakdown Tester is a precision instrument designed to m... |
Похожие товары
 |
ER4047 Aluminum Mig Welding Wire | Продавец: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | Продавец: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | Продавец: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | Продавец: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
