50th Percentile Male Side Impact Dummy

Whats/App: +86 156 1874 6768

Web: standard-groups.com

The 50th Percentile Male Side Impact Dummy represents an average adult male in terms of body size and mass. Developed based on AMVO 50th percentile male data, and optimized using multiple anthropometric databases covering different populations, this dummy provides high-fidelity biomechanical responses for side impact testing. Its design complies with ISO/TR 9790 evaluation procedures, and has been validated through 33 tests to assess its biofidelity, providing reliable data for vehicle side safety design and occupant injury protection research.

Application

The 50th Percentile Male Side Impact Dummy is primarily used for:

(1) Vehicle side impact occupant protection testing;

(2) Evaluation of B-pillar, door trim, and sill beam crashworthiness;

(3) Verification of side airbags and curtain airbag restraint systems;

(4) Safety development and regulatory certification for new or updated vehicle models;

(5) Occupant injury assessment and crash safety research;

(6) High-repetition crash data collection for research institutions and testing labs;

(7) International and regional NCAP (Euro NCAP, C-NCAP, U.S. NCAP, etc.) side impact tests.

Standards

(1) GB/T 11551 – Protection of occupants in frontal and side collisions

(2) GB 14166 – Motor vehicle seat belts and restraint systems

(3) FMVSS 214 – Side impact protection

(4) UNECE R95 – Lateral collision protection

(5) UNECE R135 – Pole side impact

(6) SAE J1727 – Side impact dummy performance specification

(7) ISO 15830 – Road vehicles – Side impact dummy – Calibration

(8) ISO/TR 9790 – Road vehicles – Side impact dummy – Evaluation method

(9) Euro NCAP – Side impact test protocol

Parameters

Dimensional Data

No.	Item	Dimension (mm)
L1	Sitting height	869 ±30
L2	Hip joint pivot height	79 ±15
L3	Hip pivot to back distance	175 ±28
L4	Thigh gap	176 ±29
L5	Foot to knee height	588 ±30
L6	Knee to back distance	670 ±30
L7	Rear head to back distance	147 ±22
L8	Upper rib thorax depth	208 ±30
L9	Lower rib/abdomen thorax depth	228 ±30
L10	Arm length	330 ±30
L11	Arm breadth	468 ±30
L12	Waist breadth	324 ±30

Mass Distribution

Component	Mass (kg)
Head	4.29 ±0.05
Neck	2.86 ±0.02
Shoulders/Thorax/Abdomen	20.56 ±0.35
Two half-arms	3.52 ±0.08
Lumbar spine and pelvis	19.3 ±0.2
Two thighs	11.72 ±0.08
Two lower legs (including ankles/feet)	10.12 ±0.14
Clothing	1.54 ±0.1
Total dressed dummy weight (with half-arms installed)	73.91 ±1.02

Sensor Configuration

Location	Sensor	Measurement	Channels
Head	Accelerometer	Acceleration	1×3
Head	Gyroscope	Angular velocity	3×1
Head	Tilt sensor	Tilt angle	1×2
Neck	Upper load cell	Force	1×6
Neck	Lower load cell	Force	1×6
Neck T1	Accelerometer	Acceleration	1×3
Shoulder	Shoulder joint load cell	Force	1×3
Spine T4	Accelerometer	Acceleration	1×3
Spine T12	Accelerometer	Acceleration	1×3
Spine	Gyroscope	Angular velocity	2×1
Spine	Tilt sensor	Tilt angle	1×2
Spine	Temperature sensor	Temperature	1×1
Shoulder/Rib	Temperature sensor	Acceleration	1×3
2D IR-TRACC	Displacement sensor	Displacement	1×1
Thorax/Rib	Accelerometer	Acceleration	3×3
2D IR-TRACC	Displacement sensor	Displacement	3×1
Abdomen/Rib	Accelerometer	Acceleration	2×3
2D IR-TRACC	Displacement sensor	Displacement	2×1
Pelvis	Accelerometer	Acceleration	1×3
Pelvis	Gyroscope	Angular velocity	3×1
Pelvis	Tilt sensor	Tilt angle	1×2
Lumbar spine	Load cell	Force	1×6
Pubis	Load cell	Force	1×1
Sacrum	Load cell	Force	1×6
Femur muscle	Load cell	Force	2×3
Legs	Thigh load cell	Force	1×6
Tibia	Upper tibia load cell	Force	1×6
Tibia	Upper tibia load cell	Force	1×6
Knee	Load cell	Force	2×1
Knee	Angle sensor	Angle	–

Other supplier products

	Automatic Smartwatch Leak Testing Machine Supplier	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) IEC 60529 (IP Code protection classification) (2) ISO 20653 (...
	Alternative to BBA steady state solar simulator tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The BBA Steady-State Solar Simulator is applicable in multiple scenarios: Fac...
	Automotive Wire Cyclic Bending Testing Machine Manufacturer in China	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) Dynamic Swing Mechanism – 180° rotation with digitall...
	Guarded hot plate thermal testing equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Measurement of thermal conductivity and thermal resistance of metals, polymers...
	Composite Material Thermal Cycling Wet Freezing Characterization System	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Thermal Cycle Wet Freezing Testing Machine is designed for comprehensive environmental ...

All supplier products

Same products

	MMA-120 Handheld Arc Welder	Seller: 871183	The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
	SHX Series Circulating Fluidized Bed Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
	YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
	DHL Series Coal-Fired Steam Boilers	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
	SZL Series Biomass Steam Boiler	Seller: Hebei Genjux Boiler Co.,Ltd	Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...