50th Percentile Male Side Impact Dummy
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The 50th Percentile Male Side Impact Dummy represents an average adult male in terms of body size and mass. Developed based on AMVO 50th percentile male data, and optimized using multiple anthropometric databases covering different populations, this dummy provides high-fidelity biomechanical responses for side impact testing. Its design complies with ISO/TR 9790 evaluation procedures, and has been validated through 33 tests to assess its biofidelity, providing reliable data for vehicle side safety design and occupant injury protection research.
Application
The 50th Percentile Male Side Impact Dummy is primarily used for:
(1) Vehicle side impact occupant protection testing;
(2) Evaluation of B-pillar, door trim, and sill beam crashworthiness;
(3) Verification of side airbags and curtain airbag restraint systems;
(4) Safety development and regulatory certification for new or updated vehicle models;
(5) Occupant injury assessment and crash safety research;
(6) High-repetition crash data collection for research institutions and testing labs;
(7) International and regional NCAP (Euro NCAP, C-NCAP, U.S. NCAP, etc.) side impact tests.
Standards
(1) GB/T 11551 – Protection of occupants in frontal and side collisions
(2) GB 14166 – Motor vehicle seat belts and restraint systems
(3) FMVSS 214 – Side impact protection
(4) UNECE R95 – Lateral collision protection
(5) UNECE R135 – Pole side impact
(6) SAE J1727 – Side impact dummy performance specification
(7) ISO 15830 – Road vehicles – Side impact dummy – Calibration
(8) ISO/TR 9790 – Road vehicles – Side impact dummy – Evaluation method
(9) Euro NCAP – Side impact test protocol
Parameters
Dimensional Data
| No. | Item | Dimension (mm) |
|---|---|---|
| L1 | Sitting height | 869 ±30 |
| L2 | Hip joint pivot height | 79 ±15 |
| L3 | Hip pivot to back distance | 175 ±28 |
| L4 | Thigh gap | 176 ±29 |
| L5 | Foot to knee height | 588 ±30 |
| L6 | Knee to back distance | 670 ±30 |
| L7 | Rear head to back distance | 147 ±22 |
| L8 | Upper rib thorax depth | 208 ±30 |
| L9 | Lower rib/abdomen thorax depth | 228 ±30 |
| L10 | Arm length | 330 ±30 |
| L11 | Arm breadth | 468 ±30 |
| L12 | Waist breadth | 324 ±30 |
Mass Distribution
| Component | Mass (kg) |
|---|---|
| Head | 4.29 ±0.05 |
| Neck | 2.86 ±0.02 |
| Shoulders/Thorax/Abdomen | 20.56 ±0.35 |
| Two half-arms | 3.52 ±0.08 |
| Lumbar spine and pelvis | 19.3 ±0.2 |
| Two thighs | 11.72 ±0.08 |
| Two lower legs (including ankles/feet) | 10.12 ±0.14 |
| Clothing | 1.54 ±0.1 |
| Total dressed dummy weight (with half-arms installed) | 73.91 ±1.02 |
Sensor Configuration
| Location | Sensor | Measurement | Channels |
|---|---|---|---|
| Head | Accelerometer | Acceleration | 1×3 |
| Head | Gyroscope | Angular velocity | 3×1 |
| Head | Tilt sensor | Tilt angle | 1×2 |
| Neck | Upper load cell | Force | 1×6 |
| Neck | Lower load cell | Force | 1×6 |
| Neck T1 | Accelerometer | Acceleration | 1×3 |
| Shoulder | Shoulder joint load cell | Force | 1×3 |
| Spine T4 | Accelerometer | Acceleration | 1×3 |
| Spine T12 | Accelerometer | Acceleration | 1×3 |
| Spine | Gyroscope | Angular velocity | 2×1 |
| Spine | Tilt sensor | Tilt angle | 1×2 |
| Spine | Temperature sensor | Temperature | 1×1 |
| Shoulder/Rib | Temperature sensor | Acceleration | 1×3 |
| 2D IR-TRACC | Displacement sensor | Displacement | 1×1 |
| Thorax/Rib | Accelerometer | Acceleration | 3×3 |
| 2D IR-TRACC | Displacement sensor | Displacement | 3×1 |
| Abdomen/Rib | Accelerometer | Acceleration | 2×3 |
| 2D IR-TRACC | Displacement sensor | Displacement | 2×1 |
| Pelvis | Accelerometer | Acceleration | 1×3 |
| Pelvis | Gyroscope | Angular velocity | 3×1 |
| Pelvis | Tilt sensor | Tilt angle | 1×2 |
| Lumbar spine | Load cell | Force | 1×6 |
| Pubis | Load cell | Force | 1×1 |
| Sacrum | Load cell | Force | 1×6 |
| Femur muscle | Load cell | Force | 2×3 |
| Legs | Thigh load cell | Force | 1×6 |
| Tibia | Upper tibia load cell | Force | 1×6 |
| Tibia | Upper tibia load cell | Force | 1×6 |
| Knee | Load cell | Force | 2×1 |
| Knee | Angle sensor | Angle | – |
在线联系供应商
Other supplier products
 |
Solid split-type weighted dummy for load simulation testing | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Solid Split-Type Weighted Dummyis a premium, high-stability ballast syste... |
 |
Sponge foam collapsible hardness meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com Purpose: This machine is used to measure the indentation hardness of porous elastic materi... |
 |
Pinhole Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The pinhole tester for aluminum foil is a device specifically used to detect micro - pinhol... |
 |
Manikin Flame Engulfment Test Apparatus | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction The Manikin Flame Engulfment Test Apparatus conforms to gbt23467-2009, iso1... |
 |
MST Medical Compression Stocking Tester,compression sock tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The MST Medical Compression Stocking Tester is a professional instrument designed to evalua... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
