Automatic Circular Pilling Cycle Counter
Get a quote：
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The G235P Circular Locus Pilling Tester is used to evaluate the pilling and fuzzing behavior of fabrics, including woolen, synthetic, pure cotton, blended, knitted, and woven materials, to assess product quality and processing effects. During testing, the fabric is rubbed against nylon brushes and abrasive materials, or alternatively, rubbed with abrasive materials in a conditioned (moisture-controlled) state.
Application
The instrument is used to test the pilling conditions ofwool fabric, chemical fiber cotton, and blended, knitted, woven fabric to identify product quality and process effect. When testing, the fabric is rubbed against nylon brush and abrasive, or rubbed against abrasive only in the humidity state.
Standard
GB/T.1Determination of pilling properties of textile fabrics - Part 1: Circular trajectory method
JIGBell-type gas flow standard device verification procedures
DIN.2Testing of textiles - Wear test of flat fabrics – Roll to mill
Features
1. Scientific mechanical structure, smooth rotation, no mechanical noise, no contact fatigue failure, suitable for long continuous operation.
2. The use of standard nylon brush, the rigidity of nylon wire must be uniform, so as to control the fluff effect of nylon brush.
3. Ergonomic design, the surface using a spray forming, smooth and beautiful.
Test Reference
| Sample type | Pressure / cN | Number of fluff times | Number of pilling times |
| Synthetic fiber knitted fabric | 590 | 150 | 150 |
| Chemical fiber woven fabric | 590 | 50 | 50 |
| Military service (combed blended) | 490 | 30 | 50 |
| Combed wool fabric | 780 | 0 | 600 |
| Coarse wool fabric | 490 | 0 | 50 |
Test Parameters
| Items | Parameters |
| Grinding head is in contact with grinding plane | ≤0.2mm |
| The parallelism of grinding head and grinding plane | ≤0.3mm |
| The relative movement trajectory of grinding head and grinding plane | 40±1mm |
| Nylon brush surface is flush, its height difference | <0.5mm |
| Grinding plane reciprocating speed | 60±1 times/min |
| Weight of grinding head | 490cN±1% |
| Weight of heavy hammer | 290cN±1% |
| Weight of hammer | 100cN±1% |
| Select the number of times | 1~9999 |
Send product request
Other supplier products
 |
Nasal Oxygen Cannula Airflow Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Nasal Oxygen Cannula Airflow Resistance Tester is designed in strict compliance with YY... |
 |
Best Guide Wire Tip Softness Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards FDA-16007 FDA Guidance: Coronary, Peripheral, and Neurovascular Guidewires &ndas... |
 |
Wear Track Profilometer | Whats/App: +86 156 1874 6768 Web: standard-groups.com A wear profiler is a device used to measure the characteristics of worn surfaces, providing... |
 |
ASTM E659 Liquid autoignition point tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Liquid Autoignition Point Tester is a device used to determine the lowest temperature a... |
 |
Xenon Arc Weathering Instruments | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction SI4000Xenon Arc Weather Ometer utilizes a xenon lamp to simulate ideal natura... |
