Respirator Fit Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Qinsun PortaCount Respirator Fit Tester assesses the overall integrity of masks by performing an aerosol leak test using the PortaCount particle detector. The instrument operates under controlled negative pressure and constant airflow, providing accurate quantitative fit measurements. Masks are tested on a full headform with an enhanced bladder seal system to simulate real-life usage, allowing the mask’s head harness to function naturally and ensuring more precise test results.This system eliminates the guesswork and variability of qualitative fit tests, providing objective and repeatable evaluation of mask fit and protection performance.
Application
The PortaCount Respirator Fit Tester is suitable for fit and integrity testing across the following industries and products:
(1) Military and Defense: CBRN gas masks, full-face respirators — overall fit and protection factor assessment
(2) Occupational Safety: commercial respirators, industrial dust masks, half-face and full-face respirators — fit testing and leak detection
(3) Medical and Healthcare Industry: surgical masks, N95/FFP masks, medical respirators — quantitative fit evaluation
(4) Research and Development: development of new respirator models and harness designs, optimization of fit and seal
(5) Quality Control: production batch verification, ensuring proper mask fit for various models and sizes
(6) Third-Party Testing Laboratories: certification testing, evaluation of mask protection factor, exhalation valve and drink tube performance
The instrument is widely used for product development, R&D, production quality control, and laboratory fit testing.
Standards
The instrument complies with and can be applied to the following standards (including but not limited to):
(1) ISO 16975-3:2017 – Respiratory Protective Devices — Selection, Use, and Maintenance — Part 3: Fit Testing Procedures
Features
(1) Separate testing for overall mask integrity (Protection Factor), exhalation valve, and drink tube
(2) Integrated aerosol wand for pinpointing leak locations, enabling immediate evaluation and repair
(3) Full headform configuration allows the mask’s head harness to function naturally, simulating real-life use
(4) Single headform with enhanced bladder seal system provides a tight seal for most gas mask and full-face respirator types and sizes
(5) Easy-to-read display and intuitive step-by-step test sequence minimize operator training requirements
(6) Objective quantitative measurement eliminates the uncertainty of qualitative fit testing
Technical Specifications
| Item | Specification |
|---|---|
| Fit Factor Range | Greater than 10.000. 1–200 |
| Fit Factor Accuracy | ±10% of reading |
| Dimensions | 17 cm × 22 cm × 24 cm (6.75 in × 8.5 in × 9.5 in) |
| Weight | Main unit: 3.1 kg (6.8 lb); With standard accessories and carrying case: 8.2 kg (18 lb) |
| Power Supply | 100 to 250 VAC, 50 to 60 Hz |
| Flow Rate | Sample flow: 350 cm³/min; Total flow: 1000 cm³/min (nominal) |
| Temperature Range | Operating: 0 to 35°C (32 to 100°F); Storage: -40 to 70°C (-40 to 160°F) |
| Alcohol | Operating time: 6 hours at 21°C (70°F); Alcohol type: 99.5%+ Isopropyl Alcohol (Analytical Grade) |
| Carrying Case Dimensions (H × W × D) | 23 cm × 36 cm × 53 cm (9 in × 14 in × 21 in) |
Send product request
Other supplier products
 |
Guarded Heat Flow Meter | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Guarded Heat Flow Meter is a precision instrument designed to measure the thermal resis... |
 |
Silicon-based negative expansion in situ fast screening system | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Silicon-based Negative Electrode Expansion In-situ Fast Screening System is designed fo... |
 |
Photovoltaic module outdoor exposure test system | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and... |
 |
Toy Flammability Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheToy Flammability Testeris designed to evaluate the flame resistance of children's appare... |
 |
UV Accelerated Weathering Tester丨UV Accelerated Weathering Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D4329、ASTM D4587、ASTM D4799 、ASTM D5208、ASTM G151、ASTM G154 、EN 927-6、EN 129... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
