SUGA U48AU Carbon Arc Weathering Test Chamber
Get a quote：
Whats/App: +86 181 0160 0864
The SUGA U48AU Carbon Arc Weathering Test Chamber is a globally recognized instrument designed for high-precision accelerated lightfastness and weathering testing. By utilizing an enclosed carbon arc lamp as its primary light source, this chamber replicates the ultraviolet and visible spectrum of sunlight to evaluate how materials degrade over time. It allows you to simulate the effects of prolonged solar exposure on various products—ranging from textiles to electronics—ensuring that your materials meet international durability and colorfastness requirements before they reach the market.
Applications
The SUGA U48AU Carbon Arc Weathering Test Chamber is a globally recognized instrument for accelerated sunlight colorfastness testing. It evaluates the light-induced aging of various materials and products, serving applications in textile fibers, building materials, notebooks, and common office supplies. The chamber complies with multiple sunlight colorfastness testing standards.
Standards
ASTM G153-13 Standard Practice for Testing Nonmetallic Materials Using a Closed Carbon Arc Lamp
ASTM D3980 Practice for Interlaboratory Testing of Paints and Related Materials
ASTM G23 Testing Nonmetallic Materials Using Carbon Arc Exposure Apparatus (With and Without Water)
ASTM G114 Terminology Related to Natural and Artificial Weathering Tests for Nonmetallic Materials
ASTM G151 Laboratory Light Source Acceleration Test Apparatus for Nonmetallic Materials
ASTM G152 Open Carbon Arc Exposure Method for Nonmetallic Materials
ISO 4892-3 Plastics - Laboratory Light Source Test Methods
ISO 4892-1 Plastics - Laboratory Light Source Test Methods, Part 1: General Guidelines
ISO 4892-4 Plastics - Laboratory light source test methods - Part 4: Open carbon arc lamp
JIS A1415 Test methods for accelerated exposure aging of plastic building materials
JIS D0205 Test methods for weather resistance of automotive parts
JIS L0842-2004 Test methods for lightfastness to staining under enclosed carbon arc lamp
JIS L0891-2007 Test Methods for Accelerated Weathering Colorfastness Using Xenon Arc Lamp or Sunlight-Type Carbon Arc Lamp
JIS K7102 Test Method for Colorfastness of Plastics to Carbon Arc Lamp Irradiation
JIS B7751 Sunlight Carbon Arc Lamp Type Light Resistance Tester and Weathering Tester (Enclosed Carbon Arc Lamp)
NES M0135 Weathering and Light Resistance Testing of Synthetic Resin Parts
NES M0141 Test Methods for Coated Synthetic Resins
Features
Light Source—Long-life ultraviolet carbon rod emitting UV light at 388nm wavelength, capable of continuous operation for 48 hours.
Control System—Equipped with a humidity generator and continuous airflow delivery for high-precision temperature and humidity control.
Automatic Air Control System—Regulates air circulation within the mixing chamber and environmental air.
SUGA U48 and U48AU models are available to meet diverse user requirements.
Parameters
| Item | Specifications |
|---|---|
| Light Source | Carbon Arc Lamp |
| Continuous Operation Time of Light Source | 48 hours |
| Discharge Voltage & Current | 135V±10V, 16A±2A |
| Temperature Range | 63°C±3°C |
| Humidity Range | 35% RH to 50% RH±5% RH |
| Humidity Control | Atomizer |
| Temperature Cycle | Air circulation regulated by air control valve |
| Test Samples | Maximum capacity: 108 piecesSample size: 65mm×55mm, 1mm thickness |
| Power Supply | Single-phase, 200V, 41A |
| Dimensions (L×W×H) | 104cm × 95cm × 205cm |
| Weight | 354kg |
Accessories
Ultraviolet Carbon Rods: Specialized electrodes designed for 48-hour continuous discharge.
Specimen Holders: Stainless steel clips designed for standard $65text{mm} times 55text{mm}$ samples.
Black Panel Thermometer (BPT): For monitoring the surface temperature of the specimens.
Glass Filter Globes: High-transparency globes to protect the samples from combustion byproducts while transmitting the required UV spectrum.
Humidifier Wick/Atomizer: Components for the humidity generation system.
Test Procedures
1. Preparation of Samples
Measure and cut your test materials to the standard $65text{mm} times 55text{mm}$ size. Mount them securely into the specimen holders, ensuring the side to be tested is facing inward toward the light source.
2. Rod and Filter Installation
Install a new set of carbon rods into the lamp assembly. Clean the glass globe to ensure maximum UV transmission and place it over the arc assembly. Check the gap between the rods to ensure reliable ignition.
3. Parameter Configuration
Access the control panel to set the Black Panel Temperature (BPT) to the standard $63^{circ}text{C}$ and configure the humidity levels. Set the timer for the required test duration (up to 48 hours for a single rod cycle).
4. Initiating the Test
Start the air circulation and humidity systems first, then ignite the carbon arc. The specimen rack will begin to rotate around the light source to ensure that every sample receives an identical dose of radiation.
5. Final Assessment
Once the test cycle is complete, remove the samples. Compare the exposed specimens against an unexposed control sample or a standard Gray Scale to evaluate the degree of color change, fading, or physical degradation.
Send product request
Other supplier products
 |
Resistance Tester for Protective Clothing / Protective Clothing Tester | Standards: GB/T 22042 - 2008 Clothing - Anti-static Performance - Test Method for Surface Resistivity GB/T 22043 - 2008 Clothing - Anti-static Per... |
 |
Safety Helmets Wearing Stability Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Safety Helmets Wearing Stability Tester is designed to evaluate helmet retenti... |
 |
Automotive Seat, Mounting Device and Seat Belt System Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 The Automotive Seat, Mounting Device and Seat Belt System Testing Machine is designed to evaluate the s... |
 |
Metal Angular Fixator Testing Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Metal Angular Fixator Testing Machine is a specialized device used to evaluate... |
 |
Syringe Sealing Positive Pressure Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Syringe Sealing Positive Pressure Tester is a precision instrument designed to... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | Seller: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | Seller: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
